Apache OpenNLP Developer Documentation

Written and maintained by the Apache OpenNLP Development Community

Version 1.8.3

License and Disclaimer.  The ASF licenses this documentation to you under the Apache License, Version 2.0 (the "License"); you may not use this documentation except in compliance with the License. You may obtain a copy of the License at

Unless required by applicable law or agreed to in writing, this documentation and its contents are distributed under the License on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.


Table of Contents

1. Introduction
Description
General Library Structure
Application Program Interface (API). Generic Example
Command line interface (CLI)
Description
List of tools
Setting up
Generic Example
2. Language Detector
Classifying
Language Detector Tool
Language Detector API
Training
Training Tool
Training with Leipzig
Training API
3. Sentence Detector
Sentence Detection
Sentence Detection Tool
Sentence Detection API
Sentence Detector Training
Training Tool
Training API
Evaluation
Evaluation Tool
4. Tokenizer
Tokenization
Tokenizer Tools
Tokenizer API
Tokenizer Training
Training Tool
Training API
Detokenizing
Detokenizing API
Detokenizer Dictionary
5. Name Finder
Named Entity Recognition
Name Finder Tool
Name Finder API
Name Finder Training
Training Tool
Training API
Custom Feature Generation
Evaluation
Evaluation Tool
Evaluation API
Named Entity Annotation Guidelines
6. Document Categorizer
Classifying
Document Categorizer Tool
Document Categorizer API
Training
Training Tool
Training API
7. Part-of-Speech Tagger
Tagging
POS Tagger Tool
POS Tagger API
Training
Training Tool
Training API
Tag Dictionary
Evaluation
Evaluation Tool
8. Lemmatizer
Lemmatizer Tool
Lemmatizer API
Lemmatizer Training
Training Tool
Training API
Lemmatizer Evaluation
9. Chunker
Chunking
Chunker Tool
Chunking API
Chunker Training
Training Tool
Training API
Chunker Evaluation
Chunker Evaluation Tool
10. Parser
Parsing
Parser Tool
Parsing API
Parser Training
Training Tool
Training API
Parser Evaluation
Parser Evaluation Tool
Evaluation API
11. Coreference Resolution
12. Extending OpenNLP
Writing an extension
Running in an OSGi container
13. Corpora
CONLL
CONLL 2000
CONLL 2002
CONLL 2003
Arvores Deitadas
Getting the data
Converting the data (optional)
Training and Evaluation
OntoNotes Release 4.0
Name Finder Training
Brat Format Support
Sentences and Tokens
Training
Evaluation
Cross Validation
14. Machine Learning
Maximum Entropy
Implementation
15. UIMA Integration
Running the pear sample in CVD
Further Help
16. Morfologik Addon
Morfologik Integration
Morfologik CLI Tools
17. The Command Line Interface
Doccat
Doccat
DoccatTrainer
DoccatEvaluator
DoccatCrossValidator
DoccatConverter
Langdetect
LanguageDetector
LanguageDetectorTrainer
LanguageDetectorConverter
LanguageDetectorCrossValidator
LanguageDetectorEvaluator
Dictionary
DictionaryBuilder
Tokenizer
SimpleTokenizer
TokenizerME
TokenizerTrainer
TokenizerMEEvaluator
TokenizerCrossValidator
TokenizerConverter
DictionaryDetokenizer
Sentdetect
SentenceDetector
SentenceDetectorTrainer
SentenceDetectorEvaluator
SentenceDetectorCrossValidator
SentenceDetectorConverter
Namefind
TokenNameFinder
TokenNameFinderTrainer
TokenNameFinderEvaluator
TokenNameFinderCrossValidator
TokenNameFinderConverter
CensusDictionaryCreator
Postag
POSTagger
POSTaggerTrainer
POSTaggerEvaluator
POSTaggerCrossValidator
POSTaggerConverter
Lemmatizer
LemmatizerME
LemmatizerTrainerME
LemmatizerEvaluator
Chunker
ChunkerME
ChunkerTrainerME
ChunkerEvaluator
ChunkerCrossValidator
ChunkerConverter
Parser
Parser
ParserTrainer
ParserEvaluator
ParserConverter
BuildModelUpdater
CheckModelUpdater
TaggerModelReplacer
Entitylinker
EntityLinker
Languagemodel
NGramLanguageModel

List of Tables

2.1. Normalizers
5.1. Generator elements

Chapter 1. Introduction

Description

The Apache OpenNLP library is a machine learning based toolkit for the processing of natural language text. It supports the most common NLP tasks, such as tokenization, sentence segmentation, part-of-speech tagging, named entity extraction, chunking, parsing, and coreference resolution. These tasks are usually required to build more advanced text processing services. OpenNLP also included maximum entropy and perceptron based machine learning.

The goal of the OpenNLP project will be to create a mature toolkit for the abovementioned tasks. An additional goal is to provide a large number of pre-built models for a variety of languages, as well as the annotated text resources that those models are derived from.

General Library Structure

The Apache OpenNLP library contains several components, enabling one to build a full natural language processing pipeline. These components include: sentence detector, tokenizer, name finder, document categorizer, part-of-speech tagger, chunker, parser, coreference resolution. Components contain parts which enable one to execute the respective natural language processing task, to train a model and often also to evaluate a model. Each of these facilities is accessible via its application program interface (API). In addition, a command line interface (CLI) is provided for convenience of experiments and training.

Application Program Interface (API). Generic Example

OpenNLP components have similar APIs. Normally, to execute a task, one should provide a model and an input.

A model is usually loaded by providing a FileInputStream with a model to a constructor of the model class:

                    
try (InputStream modelIn = new FileInputStream("lang-model-name.bin")) {
  SomeModel model = new SomeModel(modelIn);
}

            

After the model is loaded the tool itself can be instantiated.

                
ToolName toolName = new ToolName(model);
        

After the tool is instantiated, the processing task can be executed. The input and the output formats are specific to the tool, but often the output is an array of String, and the input is a String or an array of String.

                
String output[] = toolName.executeTask("This is a sample text.");
        

Command line interface (CLI)

Description

OpenNLP provides a command line script, serving as a unique entry point to all included tools. The script is located in the bin directory of OpenNLP binary distribution. Included are versions for Windows: opennlp.bat and Linux or compatible systems: opennlp.

List of tools

The list of command line tools for Apache OpenNLP 1.8.3, as well as a description of its arguments, is available at section Chapter 17, The Command Line Interface.

Setting up

OpenNLP script uses JAVA_CMD and JAVA_HOME variables to determine which command to use to execute Java virtual machine.

OpenNLP script uses OPENNLP_HOME variable to determine the location of the binary distribution of OpenNLP. It is recommended to point this variable to the binary distribution of current OpenNLP version and update PATH variable to include $OPENNLP_HOME/bin or %OPENNLP_HOME%\bin.

Such configuration allows calling OpenNLP conveniently. Examples below suppose this configuration has been done.

Generic Example

Apache OpenNLP provides a common command line script to access all its tools:

                
$ opennlp
                 

This script prints current version of the library and lists all available tools:

                
OpenNLP <VERSION>. Usage: opennlp TOOL
where TOOL is one of:
  Doccat                            learnable document categorizer
  DoccatTrainer                     trainer for the learnable document categorizer
  DoccatConverter                   converts leipzig data format to native OpenNLP format
  DictionaryBuilder                 builds a new dictionary
  SimpleTokenizer                   character class tokenizer
  TokenizerME                       learnable tokenizer
  TokenizerTrainer                  trainer for the learnable tokenizer
  TokenizerMEEvaluator              evaluator for the learnable tokenizer
  TokenizerCrossValidator           K-fold cross validator for the learnable tokenizer
  TokenizerConverter                converts foreign data formats (namefinder,conllx,pos) to native OpenNLP format
  DictionaryDetokenizer
  SentenceDetector                  learnable sentence detector
  SentenceDetectorTrainer           trainer for the learnable sentence detector
  SentenceDetectorEvaluator         evaluator for the learnable sentence detector
  SentenceDetectorCrossValidator    K-fold cross validator for the learnable sentence detector
  SentenceDetectorConverter         converts foreign data formats (namefinder,conllx,pos) to native OpenNLP format
  TokenNameFinder                   learnable name finder
  TokenNameFinderTrainer            trainer for the learnable name finder
  TokenNameFinderEvaluator          Measures the performance of the NameFinder model with the reference data
  TokenNameFinderCrossValidator     K-fold cross validator for the learnable Name Finder
  TokenNameFinderConverter          converts foreign data formats (bionlp2004,conll03,conll02,ad) to native OpenNLP format
  CensusDictionaryCreator           Converts 1990 US Census names into a dictionary
  POSTagger                         learnable part of speech tagger
  POSTaggerTrainer                  trains a model for the part-of-speech tagger
  POSTaggerEvaluator                Measures the performance of the POS tagger model with the reference data
  POSTaggerCrossValidator           K-fold cross validator for the learnable POS tagger
  POSTaggerConverter                converts conllx data format to native OpenNLP format
  ChunkerME                         learnable chunker
  ChunkerTrainerME                  trainer for the learnable chunker
  ChunkerEvaluator                  Measures the performance of the Chunker model with the reference data
  ChunkerCrossValidator             K-fold cross validator for the chunker
  ChunkerConverter                  converts ad data format to native OpenNLP format
  Parser                            performs full syntactic parsing
  ParserTrainer                     trains the learnable parser
  ParserEvaluator					Measures the performance of the Parser model with the reference data
  BuildModelUpdater                 trains and updates the build model in a parser model
  CheckModelUpdater                 trains and updates the check model in a parser model
  TaggerModelReplacer               replaces the tagger model in a parser model
All tools print help when invoked with help parameter
Example: opennlp SimpleTokenizer help

                

OpenNLP tools have similar command line structure and options. To discover tool options, run it with no parameters:

                
$ opennlp ToolName
                 

The tool will output two blocks of help.

The first block describes the general structure of this tool command line:

                
Usage: opennlp TokenizerTrainer[.namefinder|.conllx|.pos] [-abbDict path] ...  -model modelFile ...
                

The general structure of this tool command line includes the obligatory tool name (TokenizerTrainer), the optional format parameters ([.namefinder|.conllx|.pos]), the optional parameters ([-abbDict path] ...), and the obligatory parameters (-model modelFile ...).

The format parameters enable direct processing of non-native data without conversion. Each format might have its own parameters, which are displayed if the tool is executed without or with help parameter:

                
$ opennlp TokenizerTrainer.conllx help
                

                
Usage: opennlp TokenizerTrainer.conllx [-abbDict path] [-alphaNumOpt isAlphaNumOpt] ...

Arguments description:
        -abbDict path
                abbreviation dictionary in XML format.
        ...
                

To switch the tool to a specific format, add a dot and the format name after the tool name:

                
$ opennlp TokenizerTrainer.conllx -model en-pos.bin ...
                

The second block of the help message describes the individual arguments:

                
Arguments description:
        -type maxent|perceptron|perceptron_sequence
                The type of the token name finder model. One of maxent|perceptron|perceptron_sequence.
        -dict dictionaryPath
                The XML tag dictionary file
        ...
                

Most tools for processing need to be provided at least a model:

                
$ opennlp ToolName lang-model-name.bin
                 

When tool is executed this way, the model is loaded and the tool is waiting for the input from standard input. This input is processed and printed to standard output.

Alternative, or one should say, most commonly used way is to use console input and output redirection options to provide also an input and an output files:

            
$ opennlp ToolName lang-model-name.bin < input.txt > output.txt
                

Most tools for model training need to be provided first a model name, optionally some training options (such as model type, number of iterations), and then the data.

A model name is just a file name.

Training options often include number of iterations, cutoff, abbreviations dictionary or something else. Sometimes it is possible to provide these options via training options file. In this case these options are ignored and the ones from the file are used.

For the data one has to specify the location of the data (filename) and often language and encoding.

A generic example of a command line to launch a tool trainer might be:

                
$ opennlp ToolNameTrainer -model en-model-name.bin -lang en -data input.train -encoding UTF-8
                 

or with a format:

                
$ opennlp ToolNameTrainer.conll03 -model en-model-name.bin -lang en -data input.train \
                                  -types per -encoding UTF-8
                 

Most tools for model evaluation are similar to those for task execution, and need to be provided fist a model name, optionally some evaluation options (such as whether to print misclassified samples), and then the test data. A generic example of a command line to launch an evaluation tool might be:

                
$ opennlp ToolNameEvaluator -model en-model-name.bin -lang en -data input.test -encoding UTF-8
                 

Chapter 2. Language Detector

Classifying

The OpenNLP Language Detector classifies a document in ISO-639-3 languages according to the model capabilities. A model can be trained with Maxent, Perceptron or Naive Bayes algorithms. By default normalizes a text and the context generator extracts n-grams of size 1, 2 and 3. The n-gram sizes, the normalization and the context generator can be customized by extending the LanguageDetectorFactory.

The default normalizers are:

Table 2.1. Normalizers

NormalizerDescription
EmojiCharSequenceNormalizerReplaces emojis by blank space
UrlCharSequenceNormalizerReplaces URLs and E-Mails by a blank space.
TwitterCharSequenceNormalizerReplaces hashtags and Twitter user names by blank spaces.
NumberCharSequenceNormalizerReplaces number sequences by blank spaces
ShrinkCharSequenceNormalizerShrink characters that repeats three or more times to only two repetitions.


Language Detector Tool

The easiest way to try out the language detector is the command line tool. The tool is only intended for demonstration and testing. The following command shows how to use the language detector tool.

			
$ bin/opennlp LanguageDetector model
		 

The input is read from standard input and output is written to standard output, unless they are redirected or piped.

Language Detector API

To perform classification you will need a machine learning model - these are encapsulated in the LanguageDetectorModel class of OpenNLP tools.

First you need to grab the bytes from the serialized model on an InputStream - we'll leave it you to do that, since you were the one who serialized it to begin with. Now for the easy part:

				
InputStream is = ...
LanguageDetectorModel m = new LanguageDetectorModel(is);
				

With the LanguageDetectorModel in hand we are just about there:

				
String inputText = ...
LanguageDetector myCategorizer = new LanguageDetectorME(m);

// Get the most probable language
Language bestLanguage = myCategorizer.predictLanguage(inputText);
System.out.println("Best language: " + bestLanguage.getLang());
System.out.println("Best language confidence: " + bestLanguage.getConfidence());

// Get an array with the most probable languages
Language[] languages = myCategorizer.predictLanguages(null);
				

Note that the both the API or the CLI will consider the complete text to choose the most probable languages. To handle mixed language one can analyze smaller chunks of text to find language regions.

Training

The Language Detector can be trained on annotated training material. The data can be in OpenNLP Language Detector training format. This is one document per line, containing the ISO-639-3 language code and text separated by a tab. Other formats can also be available. The following sample shows the sample from above in the required format.

				
spa     A la fecha tres calles bonaerenses recuerdan su nombre (en Ituzaingó, Merlo y Campana). A la fecha, unas 50 \
		naves y 20 aviones se han perdido en esa área particular del océano Atlántico.
deu     Alle Jahre wieder: Millionen Spanier haben am Dienstag die Auslosung in der größten Lotterie der Welt verfolgt.\
 		Alle Jahre wieder: So gelingt der stressfreie Geschenke-Umtausch Artikel per E-Mail empfehlen So gelingt der \
 		stressfre ie Geschenke-Umtausch Nicht immer liegt am Ende das unter dem Weihnachtsbaum, was man sich gewünscht hat.
srp     Већина становника боравила је кућама од блата или шаторима, како би радили на својим удаљеним пољима у долини \
		Јордана и напасали своје стадо оваца и коза. Већина становника говори оба језика.
lav     Egija Tri-Active procedūru īpaši iesaka izmantot siltākajos gadalaikos, jo ziemā aukstums var šķist arī \
		nepatīkams. Valdība vienojās, ka izmaiņas nodokļu politikā tiek konceptuāli atbalstītas, tomēr deva \
		nedēļu laika Ekonomikas ministrijai, Finanšu ministrijai un Labklājības ministrijai, lai ar vienotu \
		pozīciju atgrieztos pie jautājuma izskatīšanas.
			

Note: The line breaks marked with a backslash are just inserted for formatting purposes and must not be included in the training data.

Training Tool

The following command will train the language detector and write the model to langdetect.bin:

					
$ bin/opennlp LanguageDetectorTrainer[.leipzig] -model modelFile [-params paramsFile] [-factory factoryName] -data sampleData [-encoding charsetName]

				

Note: To customize the language detector, extend the class opennlp.tools.langdetect.LanguageDetectorFactory add it to the classpath and pass it in the -factory argument.

Training with Leipzig

The Leipzig Corpora collection presents corpora in different languages. The corpora is a collection of individual sentences collected from the web and newspapers. The Corpora is available as plain text and as MySQL database tables. The OpenNLP integration can only use the plain text version. The individual plain text packages can be downloaded here: http://corpora.uni-leipzig.de/download.html

This corpora is specially good to train Language Detector and a converter is provided. First, you need to download the files that compose the Leipzig Corpora collection to a folder. Apache OpenNLP Language Detector supports training, evaluation and cross validation using the Leipzig Corpora. For example, the following command shows how to train a model.

					
$ bin/opennlp LanguageDetectorTrainer.leipzig -model modelFile [-params paramsFile] [-factory factoryName] \
	-sentencesDir sentencesDir -sentencesPerSample sentencesPerSample -samplesPerLanguage samplesPerLanguage \
	[-encoding charsetName]

				

The following sequence of commands shows how to convert the Leipzig Corpora collection at folder leipzig-train/ to the default Language Detector format, by creating groups of 5 sentences as documents and limiting to 10000 documents per language. Them, it shuffles the result and select the first 100000 lines as train corpus and the last 20000 as evaluation corpus:

					
$ bin/opennlp LanguageDetectorConverter leipzig -sentencesDir leipzig-train/ -sentencesPerSample 5 -samplesPerLanguage 10000 > leipzig.txt
$ perl -MList::Util=shuffle -e 'print shuffle(<STDIN>);' < leipzig.txt > leipzig_shuf.txt
$ head -100000 < leipzig_shuf.txt > leipzig.train
$ tail -20000 < leipzig_shuf.txt > leipzig.eval

				

Training API

The following example shows how to train a model from API.

						
InputStreamFactory inputStreamFactory = new MarkableFileInputStreamFactory(new File("corpus.txt"));

ObjectStream<String> lineStream =
  new PlainTextByLineStream(inputStreamFactory, StandardCharsets.UTF_8);
ObjectStream<LanguageSample> sampleStream = new LanguageDetectorSampleStream(lineStream);

TrainingParameters params = ModelUtil.createDefaultTrainingParameters();
params.put(TrainingParameters.ALGORITHM_PARAM,
  PerceptronTrainer.PERCEPTRON_VALUE);
params.put(TrainingParameters.CUTOFF_PARAM, 0);

LanguageDetectorFactory factory = new LanguageDetectorFactory();

LanguageDetectorModel model = LanguageDetectorME.train(sampleStream, params, factory);
model.serialize(new File("langdetect.bin"));
}

	

Chapter 3. Sentence Detector

Sentence Detection

The OpenNLP Sentence Detector can detect that a punctuation character marks the end of a sentence or not. In this sense a sentence is defined as the longest white space trimmed character sequence between two punctuation marks. The first and last sentence make an exception to this rule. The first non whitespace character is assumed to be the begin of a sentence, and the last non whitespace character is assumed to be a sentence end. The sample text below should be segmented into its sentences.

				
Pierre Vinken, 61 years old, will join the board as a nonexecutive director Nov. 29. Mr. Vinken is
chairman of Elsevier N.V., the Dutch publishing group. Rudolph Agnew, 55 years
old and former chairman of Consolidated Gold Fields PLC, was named a director of this
British industrial conglomerate.
		

After detecting the sentence boundaries each sentence is written in its own line.

				
Pierre Vinken, 61 years old, will join the board as a nonexecutive director Nov. 29.
Mr. Vinken is chairman of Elsevier N.V., the Dutch publishing group.
Rudolph Agnew, 55 years old and former chairman of Consolidated Gold Fields PLC,
    was named a director of this British industrial conglomerate.
		

Usually Sentence Detection is done before the text is tokenized and that's the way the pre-trained models on the web site are trained, but it is also possible to perform tokenization first and let the Sentence Detector process the already tokenized text. The OpenNLP Sentence Detector cannot identify sentence boundaries based on the contents of the sentence. A prominent example is the first sentence in an article where the title is mistakenly identified to be the first part of the first sentence. Most components in OpenNLP expect input which is segmented into sentences.

Sentence Detection Tool

The easiest way to try out the Sentence Detector is the command line tool. The tool is only intended for demonstration and testing. Download the english sentence detector model and start the Sentence Detector Tool with this command:

        
$ opennlp SentenceDetector en-sent.bin
		

Just copy the sample text from above to the console. The Sentence Detector will read it and echo one sentence per line to the console. Usually the input is read from a file and the output is redirected to another file. This can be achieved with the following command.

				
$ opennlp SentenceDetector en-sent.bin < input.txt > output.txt
		

For the english sentence model from the website the input text should not be tokenized.

Sentence Detection API

The Sentence Detector can be easily integrated into an application via its API. To instantiate the Sentence Detector the sentence model must be loaded first.

				

try (InputStream modelIn = new FileInputStream("en-sent.bin")) {
  SentenceModel model = new SentenceModel(modelIn);
}
		

After the model is loaded the SentenceDetectorME can be instantiated.

				
SentenceDetectorME sentenceDetector = new SentenceDetectorME(model);
		

The Sentence Detector can output an array of Strings, where each String is one sentence.

				
String sentences[] = sentenceDetector.sentDetect("  First sentence. Second sentence. ");
		

The result array now contains two entries. The first String is "First sentence." and the second String is "Second sentence." The whitespace before, between and after the input String is removed. The API also offers a method which simply returns the span of the sentence in the input string.

				
Span sentences[] = sentenceDetector.sentPosDetect("  First sentence. Second sentence. ");
		

The result array again contains two entries. The first span beings at index 2 and ends at 17. The second span begins at 18 and ends at 34. The utility method Span.getCoveredText can be used to create a substring which only covers the chars in the span.

Sentence Detector Training

Training Tool

OpenNLP has a command line tool which is used to train the models available from the model download page on various corpora. The data must be converted to the OpenNLP Sentence Detector training format. Which is one sentence per line. An empty line indicates a document boundary. In case the document boundary is unknown, its recommended to have an empty line every few ten sentences. Exactly like the output in the sample above. Usage of the tool:

				
$ opennlp SentenceDetectorTrainer
Usage: opennlp SentenceDetectorTrainer[.namefinder|.conllx|.pos] [-abbDict path] \
               [-params paramsFile] [-iterations num] [-cutoff num] -model modelFile \
               -lang language -data sampleData [-encoding charsetName]

Arguments description:
        -abbDict path
                abbreviation dictionary in XML format.
        -params paramsFile
                training parameters file.
        -iterations num
                number of training iterations, ignored if -params is used.
        -cutoff num
                minimal number of times a feature must be seen, ignored if -params is used.
        -model modelFile
                output model file.
        -lang language
                language which is being processed.
        -data sampleData
                data to be used, usually a file name.
        -encoding charsetName
                encoding for reading and writing text, if absent the system default is used.
	

To train an English sentence detector use the following command:

				
$ opennlp SentenceDetectorTrainer -model en-sent.bin -lang en -data en-sent.train -encoding UTF-8
                        
        

It should produce the following output:

                
Indexing events using cutoff of 5

	Computing event counts...  done. 4883 events
	Indexing...  done.
Sorting and merging events... done. Reduced 4883 events to 2945.
Done indexing.
Incorporating indexed data for training...  
done.
	Number of Event Tokens: 2945
	    Number of Outcomes: 2
	  Number of Predicates: 467
...done.
Computing model parameters...
Performing 100 iterations.
  1:  .. loglikelihood=-3384.6376826743144	0.38951464263772273
  2:  .. loglikelihood=-2191.9266688597672	0.9397911120212984
  3:  .. loglikelihood=-1645.8640771555981	0.9643661683391358
  4:  .. loglikelihood=-1340.386303774519	0.9739913987302887
  5:  .. loglikelihood=-1148.4141548519624	0.9748105672742167

 ...<skipping a bunch of iterations>...

 95:  .. loglikelihood=-288.25556805874436	0.9834118369854598
 96:  .. loglikelihood=-287.2283680343481	0.9834118369854598
 97:  .. loglikelihood=-286.2174830344526	0.9834118369854598
 98:  .. loglikelihood=-285.222486981048	0.9834118369854598
 99:  .. loglikelihood=-284.24296917223916	0.9834118369854598
100:  .. loglikelihood=-283.2785335773966	0.9834118369854598
Wrote sentence detector model.
Path: en-sent.bin

		

Training API

The Sentence Detector also offers an API to train a new sentence detection model. Basically three steps are necessary to train it:

  • The application must open a sample data stream

  • Call the SentenceDetectorME.train method

  • Save the SentenceModel to a file or directly use it

The following sample code illustrates these steps:

				
ObjectStream<String> lineStream =
  new PlainTextByLineStream(new FileInputStream("en-sent.train"), StandardCharsets.UTF_8);

SentenceModel model;

try (ObjectStream<SentenceSample> sampleStream = new SentenceSampleStream(lineStream)) {
  model = SentenceDetectorME.train("en", sampleStream, true, null, TrainingParameters.defaultParams());
}

try (OutputStream modelOut = new BufferedOutputStream(new FileOutputStream(modelFile))) {
  model.serialize(modelOut);
}
		

Evaluation

Evaluation Tool

The command shows how the evaluator tool can be run:

				
$ opennlp SentenceDetectorEvaluator -model en-sent.bin -data en-sent.eval -encoding UTF-8

Loading model ... done
Evaluating ... done

Precision: 0.9465737514518002
Recall: 0.9095982142857143
F-Measure: 0.9277177006260672
                

The en-sent.eval file has the same format as the training data.

Chapter 4. Tokenizer

Tokenization

The OpenNLP Tokenizers segment an input character sequence into tokens. Tokens are usually words, punctuation, numbers, etc.

			
Pierre Vinken, 61 years old, will join the board as a nonexecutive director Nov. 29.
Mr. Vinken is chairman of Elsevier N.V., the Dutch publishing group.
Rudolph Agnew, 55 years old and former chairman of Consolidated Gold Fields
    PLC, was named a director of this British industrial conglomerate.
			
		    

The following result shows the individual tokens in a whitespace separated representation.

			
Pierre Vinken , 61 years old , will join the board as a nonexecutive director Nov. 29 .
Mr. Vinken is chairman of Elsevier N.V. , the Dutch publishing group .
Rudolph Agnew , 55 years old and former chairman of Consolidated Gold Fields PLC ,
    was named a nonexecutive director of this British industrial conglomerate . 
A form of asbestos once used to make Kent cigarette filters has caused a high
    percentage of cancer deaths among a group of workers exposed to it more than 30 years ago ,
    researchers reported . 
			
		 	

OpenNLP offers multiple tokenizer implementations:

  • Whitespace Tokenizer - A whitespace tokenizer, non whitespace sequences are identified as tokens

  • Simple Tokenizer - A character class tokenizer, sequences of the same character class are tokens

  • Learnable Tokenizer - A maximum entropy tokenizer, detects token boundaries based on probability model

Most part-of-speech taggers, parsers and so on, work with text tokenized in this manner. It is important to ensure that your tokenizer produces tokens of the type expected by your later text processing components.

With OpenNLP (as with many systems), tokenization is a two-stage process: first, sentence boundaries are identified, then tokens within each sentence are identified.

Tokenizer Tools

The easiest way to try out the tokenizers are the command line tools. The tools are only intended for demonstration and testing.

There are two tools, one for the Simple Tokenizer and one for the learnable tokenizer. A command line tool the for the Whitespace Tokenizer does not exist, because the whitespace separated output would be identical to the input.

The following command shows how to use the Simple Tokenizer Tool.

			
$ opennlp SimpleTokenizer
		    

To use the learnable tokenizer download the english token model from our website.

			
$ opennlp TokenizerME en-token.bin
		    

To test the tokenizer copy the sample from above to the console. The whitespace separated tokens will be written back to the console.

Usually the input is read from a file and written to a file.

			
$ opennlp TokenizerME en-token.bin < article.txt > article-tokenized.txt
		    

It can be done in the same way for the Simple Tokenizer.

Since most text comes truly raw and doesn't have sentence boundaries and such, its possible to create a pipe which first performs sentence boundary detection and tokenization. The following sample illustrates that.

			
$ opennlp SentenceDetector sentdetect.model < article.txt | opennlp TokenizerME tokenize.model | more
Loading model ... Loading model ... done
done
Showa Shell gained 20 to 1,570 and Mitsubishi Oil rose 50 to 1,500.
Sumitomo Metal Mining fell five yen to 692 and Nippon Mining added 15 to 960 .
Among other winners Wednesday was Nippon Shokubai , which was up 80 at 2,410 .
Marubeni advanced 11 to 890 .
London share prices were bolstered largely by continued gains on Wall Street and technical 
    factors affecting demand for London 's blue-chip stocks .
...etc...
		 

Of course this is all on the command line. Many people use the models directly in their Java code by creating SentenceDetector and Tokenizer objects and calling their methods as appropriate. The following section will explain how the Tokenizers can be used directly from java.

Tokenizer API

The Tokenizers can be integrated into an application by the defined API. The shared instance of the WhitespaceTokenizer can be retrieved from a static field WhitespaceTokenizer.INSTANCE. The shared instance of the SimpleTokenizer can be retrieved in the same way from SimpleTokenizer.INSTANCE. To instantiate the TokenizerME (the learnable tokenizer) a Token Model must be created first. The following code sample shows how a model can be loaded.

			

try (InputStream modelIn = new FileInputStream("en-token.bin")) {
  TokenizerModel model = new TokenizerModel(modelIn);
}
		 

After the model is loaded the TokenizerME can be instantiated.

			
Tokenizer tokenizer = new TokenizerME(model);
		 

The tokenizer offers two tokenize methods, both expect an input String object which contains the untokenized text. If possible it should be a sentence, but depending on the training of the learnable tokenizer this is not required. The first returns an array of Strings, where each String is one token.

			
String tokens[] = tokenizer.tokenize("An input sample sentence.");
		 

The output will be an array with these tokens.

			
"An", "input", "sample", "sentence", "."
		 

The second method, tokenizePos returns an array of Spans, each Span contain the begin and end character offsets of the token in the input String.

			
Span tokenSpans[] = tokenizer.tokenizePos("An input sample sentence.");		
			

The tokenSpans array now contain 5 elements. To get the text for one span call Span.getCoveredText which takes a span and the input text. The TokenizerME is able to output the probabilities for the detected tokens. The getTokenProbabilities method must be called directly after one of the tokenize methods was called.

			
TokenizerME tokenizer = ...

String tokens[] = tokenizer.tokenize(...);
double tokenProbs[] = tokenizer.getTokenProbabilities();
			

The tokenProbs array now contains one double value per token, the value is between 0 and 1, where 1 is the highest possible probability and 0 the lowest possible probability.

Tokenizer Training

Training Tool

OpenNLP has a command line tool which is used to train the models available from the model download page on various corpora. The data can be converted to the OpenNLP Tokenizer training format or used directly. The OpenNLP format contains one sentence per line. Tokens are either separated by a whitespace or by a special <SPLIT> tag. The following sample shows the sample from above in the correct format.

			    
Pierre Vinken<SPLIT>, 61 years old<SPLIT>, will join the board as a nonexecutive director Nov. 29<SPLIT>.
Mr. Vinken is chairman of Elsevier N.V.<SPLIT>, the Dutch publishing group<SPLIT>.
Rudolph Agnew<SPLIT>, 55 years old and former chairman of Consolidated Gold Fields PLC<SPLIT>,
    was named a nonexecutive director of this British industrial conglomerate<SPLIT>.
			    

Usage of the tool:

			    
$ opennlp TokenizerTrainer
Usage: opennlp TokenizerTrainer[.namefinder|.conllx|.pos] [-abbDict path] \
                [-alphaNumOpt isAlphaNumOpt] [-params paramsFile] [-iterations num] \
                [-cutoff num] -model modelFile -lang language -data sampleData \
                [-encoding charsetName]

Arguments description:
        -abbDict path
                abbreviation dictionary in XML format.
        -alphaNumOpt isAlphaNumOpt
                Optimization flag to skip alpha numeric tokens for further tokenization
        -params paramsFile
                training parameters file.
        -iterations num
                number of training iterations, ignored if -params is used.
        -cutoff num
                minimal number of times a feature must be seen, ignored if -params is used.
        -model modelFile
                output model file.
        -lang language
                language which is being processed.
        -data sampleData
                data to be used, usually a file name.
        -encoding charsetName
                encoding for reading and writing text, if absent the system default is used.
                

To train the english tokenizer use the following command:

			    
$ opennlp TokenizerTrainer -model en-token.bin -alphaNumOpt -lang en -data en-token.train -encoding UTF-8

Indexing events using cutoff of 5

	Computing event counts...  done. 262271 events
	Indexing...  done.
Sorting and merging events... done. Reduced 262271 events to 59060.
Done indexing.
Incorporating indexed data for training...  
done.
	Number of Event Tokens: 59060
	    Number of Outcomes: 2
	  Number of Predicates: 15695
...done.
Computing model parameters...
Performing 100 iterations.
  1:  .. loglikelihood=-181792.40419263614	0.9614292087192255
  2:  .. loglikelihood=-34208.094253153664	0.9629238459456059
  3:  .. loglikelihood=-18784.123872910015	0.9729211388220581
  4:  .. loglikelihood=-13246.88162585859	0.9856103038460219
  5:  .. loglikelihood=-10209.262670265718	0.9894422181636552

 ...<skipping a bunch of iterations>...

 95:  .. loglikelihood=-769.2107474529454	0.999511955191386
 96:  .. loglikelihood=-763.8891914534009	0.999511955191386
 97:  .. loglikelihood=-758.6685383254891	0.9995157680414533
 98:  .. loglikelihood=-753.5458314695236	0.9995157680414533
 99:  .. loglikelihood=-748.5182305519613	0.9995157680414533
100:  .. loglikelihood=-743.5830058068038	0.9995157680414533
Wrote tokenizer model.
Path: en-token.bin
				

Training API

The Tokenizer offers an API to train a new tokenization model. Basically three steps are necessary to train it:

  • The application must open a sample data stream

  • Call the TokenizerME.train method

  • Save the TokenizerModel to a file or directly use it

The following sample code illustrates these steps:

                    
ObjectStream<String> lineStream = new PlainTextByLineStream(new FileInputStream("en-sent.train"),
    StandardCharsets.UTF_8);
ObjectStream<TokenSample> sampleStream = new TokenSampleStream(lineStream);

TokenizerModel model;

try {
  model = TokenizerME.train("en", sampleStream, true, TrainingParameters.defaultParams());
}
finally {
  sampleStream.close();
}

OutputStream modelOut = null;
try {
  modelOut = new BufferedOutputStream(new FileOutputStream(modelFile));
  model.serialize(modelOut);
} finally {
  if (modelOut != null)
     modelOut.close();
}
                

Detokenizing

Detokenizing is simple the opposite of tokenization, the original non-tokenized string should be constructed out of a token sequence. The OpenNLP implementation was created to undo the tokenization of training data for the tokenizer. It can also be used to undo the tokenization of such a trained tokenizer. The implementation is strictly rule based and defines how tokens should be attached to a sentence wise character sequence.

The rule dictionary assign to every token an operation which describes how it should be attached to one continuous character sequence.

The following rules can be assigned to a token:

  • MERGE_TO_LEFT - Merges the token to the left side.

  • MERGE_TO_RIGHT - Merges the token to the right side.

  • RIGHT_LEFT_MATCHING - Merges the token to the right side on first occurrence and to the left side on second occurrence.

The following sample will illustrate how the detokenizer with a small rule dictionary (illustration format, not the xml data format):

			
. MERGE_TO_LEFT
" RIGHT_LEFT_MATCHING		
		

The dictionary should be used to de-tokenize the following whitespace tokenized sentence:

			
He said " This is a test " .		
		

The tokens would get these tags based on the dictionary:

			
He -> NO_OPERATION
said -> NO_OPERATION
" -> MERGE_TO_RIGHT
This -> NO_OPERATION
is -> NO_OPERATION
a -> NO_OPERATION
test -> NO_OPERATION
" -> MERGE_TO_LEFT
. -> MERGE_TO_LEFT		
			

That will result in the following character sequence:

			
He said "This is a test".		
		

TODO: Add documentation about the dictionary format and how to use the API. Contributions are welcome.

Detokenizing API

TODO: Write documentation about the detokenizer api. Any contributions are very welcome. If you want to contribute please contact us on the mailing list or comment on the jira issue OPENNLP-216.

Detokenizer Dictionary

TODO: Write documentation about the detokenizer dictionary. Any contributions are very welcome. If you want to contribute please contact us on the mailing list or comment on the jira issue OPENNLP-217.

Chapter 5. Name Finder

Named Entity Recognition

The Name Finder can detect named entities and numbers in text. To be able to detect entities the Name Finder needs a model. The model is dependent on the language and entity type it was trained for. The OpenNLP projects offers a number of pre-trained name finder models which are trained on various freely available corpora. They can be downloaded at our model download page. To find names in raw text the text must be segmented into tokens and sentences. A detailed description is given in the sentence detector and tokenizer tutorial. It is important that the tokenization for the training data and the input text is identical.

Name Finder Tool

The easiest way to try out the Name Finder is the command line tool. The tool is only intended for demonstration and testing. Download the English person model and start the Name Finder Tool with this command:

				
$ opennlp TokenNameFinder en-ner-person.bin
			 

The name finder now reads a tokenized sentence per line from stdin, an empty line indicates a document boundary and resets the adaptive feature generators. Just copy this text to the terminal:

				
Pierre Vinken , 61 years old , will join the board as a nonexecutive director Nov. 29 .
Mr . Vinken is chairman of Elsevier N.V. , the Dutch publishing group .
Rudolph Agnew , 55 years old and former chairman of Consolidated Gold Fields PLC , was named
    a director of this British industrial conglomerate .
			 

the name finder will now output the text with markup for person names:

				
<START:person> Pierre Vinken <END> , 61 years old , will join the board as a nonexecutive director Nov. 29 .
Mr . <START:person> Vinken <END> is chairman of Elsevier N.V. , the Dutch publishing group .
<START:person> Rudolph Agnew <END> , 55 years old and former chairman of Consolidated Gold Fields PLC ,
    was named a director of this British industrial conglomerate .
			 

Name Finder API

To use the Name Finder in a production system it is strongly recommended to embed it directly into the application instead of using the command line interface. First the name finder model must be loaded into memory from disk or an other source. In the sample below it is loaded from disk.

				
try (InputStream modelIn = new FileInputStream("en-ner-person.bin")){
  TokenNameFinderModel model = new TokenNameFinderModel(modelIn);
}

			 

There is a number of reasons why the model loading can fail:

  • Issues with the underlying I/O

  • The version of the model is not compatible with the OpenNLP version

  • The model is loaded into the wrong component, for example a tokenizer model is loaded with TokenNameFinderModel class.

  • The model content is not valid for some other reason

After the model is loaded the NameFinderME can be instantiated.

				
NameFinderME nameFinder = new NameFinderME(model);
			

The initialization is now finished and the Name Finder can be used. The NameFinderME class is not thread safe, it must only be called from one thread. To use multiple threads multiple NameFinderME instances sharing the same model instance can be created. The input text should be segmented into documents, sentences and tokens. To perform entity detection an application calls the find method for every sentence in the document. After every document clearAdaptiveData must be called to clear the adaptive data in the feature generators. Not calling clearAdaptiveData can lead to a sharp drop in the detection rate after a few documents. The following code illustrates that:

				
for (String document[][] : documents) {

  for (String[] sentence : document) {
    Span nameSpans[] = nameFinder.find(sentence);
    // do something with the names
  }

  nameFinder.clearAdaptiveData()
}
			 

the following snippet shows a call to find

				
String sentence[] = new String[]{
    "Pierre",
    "Vinken",
    "is",
    "61",
    "years"
    "old",
    "."
    };

Span nameSpans[] = nameFinder.find(sentence);
			

The nameSpans arrays contains now exactly one Span which marks the name Pierre Vinken. The elements between the begin and end offsets are the name tokens. In this case the begin offset is 0 and the end offset is 2. The Span object also knows the type of the entity. In this case it is person (defined by the model). It can be retrieved with a call to Span.getType(). Additionally to the statistical Name Finder, OpenNLP also offers a dictionary and a regular expression name finder implementation.

TODO: Explain how to retrieve probs from the name finder for names and for non recognized names

Name Finder Training

The pre-trained models might not be available for a desired language, can not detect important entities or the performance is not good enough outside the news domain. These are the typical reason to do custom training of the name finder on a new corpus or on a corpus which is extended by private training data taken from the data which should be analyzed.

Training Tool

OpenNLP has a command line tool which is used to train the models available from the model download page on various corpora.

The data can be converted to the OpenNLP name finder training format. Which is one sentence per line. Some other formats are available as well. The sentence must be tokenized and contain spans which mark the entities. Documents are separated by empty lines which trigger the reset of the adaptive feature generators. A training file can contain multiple types. If the training file contains multiple types the created model will also be able to detect these multiple types.

Sample sentence of the data:

				
<START:person> Pierre Vinken <END> , 61 years old , will join the board as a nonexecutive director Nov. 29 .
Mr . <START:person> Vinken <END> is chairman of Elsevier N.V. , the Dutch publishing group .
			 

The training data should contain at least 15000 sentences to create a model which performs well. Usage of the tool:

				
$ opennlp TokenNameFinderTrainer
Usage: opennlp TokenNameFinderTrainer[.evalita|.ad|.conll03|.bionlp2004|.conll02|.muc6|.ontonotes|.brat] \
[-featuregen featuregenFile] [-nameTypes types] [-sequenceCodec codec] [-factory factoryName] \
[-resources resourcesDir] [-type modelType] [-params paramsFile] -lang language \
-model modelFile -data sampleData [-encoding charsetName]

Arguments description:
        -featuregen featuregenFile
                The feature generator descriptor file
        -nameTypes types
                name types to use for training
        -sequenceCodec codec
                sequence codec used to code name spans
        -factory factoryName
                A sub-class of TokenNameFinderFactory
        -resources resourcesDir
                The resources directory
        -type modelType
                The type of the token name finder model
        -params paramsFile
                training parameters file.
        -lang language
                language which is being processed.
        -model modelFile
                output model file.
        -data sampleData
                data to be used, usually a file name.
        -encoding charsetName
                encoding for reading and writing text, if absent the system default is used.
			 

It is now assumed that the english person name finder model should be trained from a file called en-ner-person.train which is encoded as UTF-8. The following command will train the name finder and write the model to en-ner-person.bin:

				
$ opennlp TokenNameFinderTrainer -model en-ner-person.bin -lang en -data en-ner-person.train -encoding UTF-8
			 

The example above will train models with a pre-defined feature set. It is also possible to use the -resources parameter to generate features based on external knowledge such as those based on word representation (clustering) features. The external resources must all be placed in a resource directory which is then passed as a parameter. If this option is used it is then required to pass, via the -featuregen parameter, a XML custom feature generator which includes some of the clustering features shipped with the TokenNameFinder. Currently three formats of clustering lexicons are accepted:

  • Space separated two column file specifying the token and the cluster class as generated by toolkits such as word2vec.

  • Space separated three column file specifying the token, clustering class and weight as such as Clark's clusters.

  • Tab separated three column Brown clusters as generated by Liang's toolkit.

Additionally it is possible to specify the number of iterations, the cutoff and to overwrite all types in the training data with a single type. Finally, the -sequenceCodec parameter allows to specify a BIO (Begin, Inside, Out) or BILOU (Begin, Inside, Last, Out, Unit) encoding to represent the Named Entities. An example of one such command would be as follows:

			   
$ opennlp TokenNameFinderTrainer -featuregen brown.xml -sequenceCodec BILOU -resources clusters/ \
-params PerceptronTrainerParams.txt -lang en -model ner-test.bin -data en-train.opennlp -encoding UTF-8
			 

Training API

To train the name finder from within an application it is recommended to use the training API instead of the command line tool. Basically three steps are necessary to train it:

  • The application must open a sample data stream

  • Call the NameFinderME.train method

  • Save the TokenNameFinderModel to a file

The three steps are illustrated by the following sample code:

				
ObjectStream<String> lineStream =
		new PlainTextByLineStream(new FileInputStream("en-ner-person.train"), StandardCharsets.UTF_8);

TokenNameFinderModel model;

try (ObjectStream<NameSample> sampleStream = new NameSampleDataStream(lineStream)) {
  model = NameFinderME.train("en", "person", sampleStream, TrainingParameters.defaultParams(),
            TokenNameFinderFactory nameFinderFactory);
}

try (modelOut = new BufferedOutputStream(new FileOutputStream(modelFile)){
  model.serialize(modelOut);
}
			 

Custom Feature Generation

OpenNLP defines a default feature generation which is used when no custom feature generation is specified. Users which want to experiment with the feature generation can provide a custom feature generator. Either via API or via an xml descriptor file.

Feature Generation defined by API

The custom generator must be used for training and for detecting the names. If the feature generation during training time and detection time is different the name finder might not be able to detect names. The following lines show how to construct a custom feature generator

					
AdaptiveFeatureGenerator featureGenerator = new CachedFeatureGenerator(
         new AdaptiveFeatureGenerator[]{
           new WindowFeatureGenerator(new TokenFeatureGenerator(), 2, 2),
           new WindowFeatureGenerator(new TokenClassFeatureGenerator(true), 2, 2),
           new OutcomePriorFeatureGenerator(),
           new PreviousMapFeatureGenerator(),
           new BigramNameFeatureGenerator(),
           new SentenceFeatureGenerator(true, false),
           new BrownTokenFeatureGenerator(BrownCluster dictResource)
           });
				

which is similar to the default feature generator but with a BrownTokenFeature added. The javadoc of the feature generator classes explain what the individual feature generators do. To write a custom feature generator please implement the AdaptiveFeatureGenerator interface or if it must not be adaptive extend the FeatureGeneratorAdapter. The train method which should be used is defined as

					
public static TokenNameFinderModel train(String languageCode, String type,
          ObjectStream<NameSample> samples, TrainingParameters trainParams,
          TokenNameFinderFactory factory) throws IOException
				

where the TokenNameFinderFactory allows to specify a custom feature generator. To detect names the model which was returned from the train method must be passed to the NameFinderME constructor.

					
new NameFinderME(model);
				 

Feature Generation defined by XML Descriptor

OpenNLP can also use a xml descriptor file to configure the feature generation. The descriptor file is stored inside the model after training and the feature generators are configured correctly when the name finder is instantiated. The following sample shows a xml descriptor which contains the default feature generator plus several types of clustering features:

					
<generators>
  <cache> 
    <generators>
      <window prevLength = "2" nextLength = "2">          
        <tokenclass/>
      </window>
      <window prevLength = "2" nextLength = "2">                
        <token/>
      </window>
      <definition/>
      <prevmap/>
      <bigram/>
      <sentence begin="true" end="false"/>
      <window prevLength = "2" nextLength = "2">
        <brownclustertoken dict="brownCluster" />
      </window>
      <brownclustertokenclass dict="brownCluster" />
      <brownclusterbigram dict="brownCluster" />
      <wordcluster dict="word2vec.cluster" />
      <wordcluster dict="clark.cluster" />
    </generators>
  </cache> 
</generators>
				 

The root element must be generators, each sub-element adds a feature generator to the configuration. The sample xml contains additional feature generators with respect to the API defined above.

The following table shows the supported elements:

Table 5.1. Generator elements

ElementAggregatedAttributes
generatorsyesnone
cacheyesnone
charngramnomin and max specify the length of the generated character ngrams
definitionnonone
dictionarynodict is the key of the dictionary resource to use, and prefix is a feature prefix string
prevmapnonone
sentencenobegin and end to generate begin or end features, both are optional and are boolean values
tokenclassnonone
tokennonone
bigramnonone
tokenpatternnonone
tokenposnomodel is the file name of the POS Tagger model to use
wordclusternodict is the key of the clustering resource to use
brownclustertokennodict is the key of the clustering resource to use
brownclustertokenclassnodict is the key of the clustering resource to use
brownclusterbigramnodict is the key of the clustering resource to use
windowyesprevLength and nextLength must be integers ans specify the window size
customnoclass is the name of the feature generator class which will be loaded


Aggregated feature generators can contain other generators, like the cache or the window feature generator in the sample.

Evaluation

The built in evaluation can measure the named entity recognition performance of the name finder. The performance is either measured on a test dataset or via cross validation.

Evaluation Tool

The following command shows how the tool can be run:

            
$ opennlp TokenNameFinderEvaluator -model en-ner-person.bin -data en-ner-person.test -encoding UTF-8

Precision: 0.8005071889818507
Recall: 0.7450581122145297
F-Measure: 0.7717879983140168
         

Note: The command line interface does not support cross evaluation in the current version.

Evaluation API

The evaluation can be performed on a pre-trained model and a test dataset or via cross validation. In the first case the model must be loaded and a NameSample ObjectStream must be created (see code samples above), assuming these two objects exist the following code shows how to perform the evaluation:

				
TokenNameFinderEvaluator evaluator = new TokenNameFinderEvaluator(new NameFinderME(model));
evaluator.evaluate(sampleStream);

FMeasure result = evaluator.getFMeasure();

System.out.println(result.toString());
			

In the cross validation case all the training arguments must be provided (see the Training API section above). To perform cross validation the ObjectStream must be resettable.

				
FileInputStream sampleDataIn = new FileInputStream("en-ner-person.train");
ObjectStream<NameSample> sampleStream = new PlainTextByLineStream(sampleDataIn.getChannel(), StandardCharsets.UTF_8);
TokenNameFinderCrossValidator evaluator = new TokenNameFinderCrossValidator("en", 100, 5);
evaluator.evaluate(sampleStream, 10);

FMeasure result = evaluator.getFMeasure();

System.out.println(result.toString());
			

Named Entity Annotation Guidelines

Annotation guidelines define what should be labeled as an entity. To build a private corpus it is important to know these guidelines and maybe write a custom one. Here is a list of publicly available annotation guidelines:

Chapter 6. Document Categorizer

Classifying

The OpenNLP Document Categorizer can classify text into pre-defined categories. It is based on maximum entropy framework. For someone interested in Gross Margin, the sample text given below could be classified as GMDecrease

			
Major acquisitions that have a lower gross margin than the existing network
also had a negative impact on the overall gross margin, but it should improve
following the implementation of its integration strategies.
		 

and the text below could be classified as GMIncrease

			
The upward movement of gross margin resulted from amounts pursuant to 
adjustments to obligations towards dealers.
		 

To be able to classify a text, the document categorizer needs a model. The classifications are requirements-specific and hence there is no pre-built model for document categorizer under OpenNLP project.

Document Categorizer Tool

The easiest way to try out the document categorizer is the command line tool. The tool is only intended for demonstration and testing. The following command shows how to use the document categorizer tool.

			
$ opennlp Doccat model
		 

The input is read from standard input and output is written to standard output, unless they are redirected or piped. As with most components in OpenNLP, document categorizer expects input which is segmented into sentences.

Document Categorizer API

To perform classification you will need a maxent model - these are encapsulated in the DoccatModel class of OpenNLP tools.

First you need to grab the bytes from the serialized model on an InputStream - we'll leave it you to do that, since you were the one who serialized it to begin with. Now for the easy part:

				
InputStream is = ...
DoccatModel m = new DoccatModel(is);
				

With the DoccatModel in hand we are just about there:

				
String inputText = ...
DocumentCategorizerME myCategorizer = new DocumentCategorizerME(m);
double[] outcomes = myCategorizer.categorize(inputText);
String category = myCategorizer.getBestCategory(outcomes);
				

Training

The Document Categorizer can be trained on annotated training material. The data can be in OpenNLP Document Categorizer training format. This is one document per line, containing category and text separated by a whitespace. Other formats can also be available. The following sample shows the sample from above in the required format. Here GMDecrease and GMIncrease are the categories.

			
GMDecrease Major acquisitions that have a lower gross margin than the existing network also \ 
           had a negative impact on the overall gross margin, but it should improve following \ 
           the implementation of its integration strategies .
GMIncrease The upward movement of gross margin resulted from amounts pursuant to adjustments \
           to obligations towards dealers .
			

Note: The line breaks marked with a backslash are just inserted for formatting purposes and must not be included in the training data.

Training Tool

The following command will train the document categorizer and write the model to en-doccat.bin:

						
$ opennlp DoccatTrainer -model en-doccat.bin -lang en -data en-doccat.train -encoding UTF-8
		 

Additionally it is possible to specify the number of iterations, and the cutoff.

Training API

So, naturally you will need some access to many pre-classified events to train your model. The class opennlp.tools.doccat.DocumentSample encapsulates a text document and its classification. DocumentSample has two constructors. Each take the text's category as one argument. The other argument can either be raw text, or an array of tokens. By default, the raw text will be split into tokens by whitespace. So, let's say your training data was contained in a text file, where the format is as described above. Then you might want to write something like this to create a collection of DocumentSamples:

						
DoccatModel model = null;
InputStream dataIn = null;

try (dataIn = new FileInputStream("en-sentiment.train")) {
  ObjectStream<String> lineStream =
		new PlainTextByLineStream(dataIn, StandardCharsets.UTF_8);
  ObjectStream<DocumentSample> sampleStream = new DocumentSampleStream(lineStream);

  model = DocumentCategorizerME.train("en", sampleStream);
}

	

Now might be a good time to cruise over to Hulu or something, because this could take a while if you've got a large training set. You may see a lot of output as well. Once you're done, you can pretty quickly step to classification directly, but first we'll cover serialization. Feel free to skim.

						
try (OutputStream modelOut = new BufferedOutputStream(new FileOutputStream(modelFile))) {
  model.serialize(modelOut);
}

Chapter 7. Part-of-Speech Tagger

Tagging

The Part of Speech Tagger marks tokens with their corresponding word type based on the token itself and the context of the token. A token might have multiple pos tags depending on the token and the context. The OpenNLP POS Tagger uses a probability model to predict the correct pos tag out of the tag set. To limit the possible tags for a token a tag dictionary can be used which increases the tagging and runtime performance of the tagger.

POS Tagger Tool

The easiest way to try out the POS Tagger is the command line tool. The tool is only intended for demonstration and testing. Download the english maxent pos model and start the POS Tagger Tool with this command:

			
$ opennlp POSTagger en-pos-maxent.bin
		 

The POS Tagger now reads a tokenized sentence per line from stdin. Copy these two sentences to the console:

			
Pierre Vinken , 61 years old , will join the board as a nonexecutive director Nov. 29 .
Mr. Vinken is chairman of Elsevier N.V. , the Dutch publishing group .
		 

the POS Tagger will now echo the sentences with pos tags to the console:

			
Pierre_NNP Vinken_NNP ,_, 61_CD years_NNS old_JJ ,_, will_MD join_VB the_DT board_NN as_IN
    a_DT nonexecutive_JJ director_NN Nov._NNP 29_CD ._.
Mr._NNP Vinken_NNP is_VBZ chairman_NN of_IN Elsevier_NNP N.V._NNP ,_, the_DT Dutch_NNP publishing_VBG group_NN
		 

The tag set used by the english pos model is the Penn Treebank tag set.

POS Tagger API

The POS Tagger can be embedded into an application via its API. First the pos model must be loaded into memory from disk or an other source. In the sample below its loaded from disk.

				
try (InputStream modelIn = new FileInputStream("en-pos-maxent.bin"){
  POSModel model = new POSModel(modelIn);
}
			

After the model is loaded the POSTaggerME can be instantiated.

				
POSTaggerME tagger = new POSTaggerME(model);
			

The POS Tagger instance is now ready to tag data. It expects a tokenized sentence as input, which is represented as a String array, each String object in the array is one token.

The following code shows how to determine the most likely pos tag sequence for a sentence.

		  
String sent[] = new String[]{"Most", "large", "cities", "in", "the", "US", "had",
                             "morning", "and", "afternoon", "newspapers", "."};		  
String tags[] = tagger.tag(sent);
			

The tags array contains one part-of-speech tag for each token in the input array. The corresponding tag can be found at the same index as the token has in the input array. The confidence scores for the returned tags can be easily retrieved from a POSTaggerME with the following method call:

		  
double probs[] = tagger.probs();
			

The call to probs is stateful and will always return the probabilities of the last tagged sentence. The probs method should only be called when the tag method was called before, otherwise the behavior is undefined.

Some applications need to retrieve the n-best pos tag sequences and not only the best sequence. The topKSequences method is capable of returning the top sequences. It can be called in a similar way as tag.

		  
Sequence topSequences[] = tagger.topKSequences(sent);
			

Each Sequence object contains one sequence. The sequence can be retrieved via Sequence.getOutcomes() which returns a tags array and Sequence.getProbs() returns the probability array for this sequence.

Training

The POS Tagger can be trained on annotated training material. The training material is a collection of tokenized sentences where each token has the assigned part-of-speech tag. The native POS Tagger training material looks like this:

		  
About_IN 10_CD Euro_NNP ,_, I_PRP reckon_VBP ._.
That_DT sounds_VBZ good_JJ ._.
			

Each sentence must be in one line. The token/tag pairs are combined with "_". The token/tag pairs are whitespace separated. The data format does not define a document boundary. If a document boundary should be included in the training material it is suggested to use an empty line.

The Part-of-Speech Tagger can either be trained with a command line tool, or via an training API.

Training Tool

OpenNLP has a command line tool which is used to train the models available from the model download page on various corpora.

Usage of the tool:

				
$ opennlp POSTaggerTrainer
Usage: opennlp POSTaggerTrainer[.conllx] [-type maxent|perceptron|perceptron_sequence] \
               [-dict dictionaryPath] [-ngram cutoff] [-params paramsFile] [-iterations num] \
               [-cutoff num] -model modelFile -lang language -data sampleData \
               [-encoding charsetName]

Arguments description:
        -type maxent|perceptron|perceptron_sequence
                The type of the token name finder model. One of maxent|perceptron|perceptron_sequence.
        -dict dictionaryPath
                The XML tag dictionary file
        -ngram cutoff
                NGram cutoff. If not specified will not create ngram dictionary.
        -params paramsFile
                training parameters file.
        -iterations num
                number of training iterations, ignored if -params is used.
        -cutoff num
                minimal number of times a feature must be seen, ignored if -params is used.
        -model modelFile
                output model file.
        -lang language
                language which is being processed.
        -data sampleData
                data to be used, usually a file name.
        -encoding charsetName
                encoding for reading and writing text, if absent the system default is used.
			 

The following command illustrates how an english part-of-speech model can be trained:

		  
$ opennlp POSTaggerTrainer -type maxent -model en-pos-maxent.bin \
                           -lang en -data en-pos.train -encoding UTF-8
		    

Training API

The Part-of-Speech Tagger training API supports the training of a new pos model. Basically three steps are necessary to train it:

  • The application must open a sample data stream

  • Call the POSTagger.train method

  • Save the POSModel to a file

The following code illustrates that:

				
POSModel model = null;

try (InputStream dataIn = new FileInputStream("en-pos.train")){
  ObjectStream<String> lineStream = new PlainTextByLineStream(dataIn, StandardCharsets.UTF_8);
  ObjectStream<POSSample> sampleStream = new WordTagSampleStream(lineStream);

  model = POSTaggerME.train("en", sampleStream, TrainingParameters.defaultParams(), null, null);
}
	

The above code performs the first two steps, opening the data and training the model. The trained model must still be saved into an OutputStream, in the sample below it is written into a file.

				
try (OutputStream modelOut = new BufferedOutputStream(new FileOutputStream(modelFile))){
  model.serialize(modelOut);
}
		

Tag Dictionary

The tag dictionary is a word dictionary which specifies which tags a specific token can have. Using a tag dictionary has two advantages, inappropriate tags can not been assigned to tokens in the dictionary and the beam search algorithm has to consider less possibilities and can search faster.

The dictionary is defined in a xml format and can be created and stored with the POSDictionary class. Please for now checkout the javadoc and source code of that class.

Note: The format should be documented and sample code should show how to use the dictionary. Any contributions are very welcome. If you want to contribute please contact us on the mailing list or comment on the jira issue OPENNLP-287.

Evaluation

The built in evaluation can measure the accuracy of the pos tagger. The accuracy can be measured on a test data set or via cross validation.

Evaluation Tool

There is a command line tool to evaluate a given model on a test data set. The following command shows how the tool can be run:

				
$ opennlp POSTaggerEvaluator -model pt.postagger.bin -data pt.postagger.test -encoding utf-8
			 

This will display the resulting accuracy score, e.g.:

				
Loading model ... done
Evaluating ... done

Accuracy: 0.9659110277825124
			 

There is a command line tool to cross validate a test data set. The following command shows how the tool can be run:

                    
$ opennlp POSTaggerCrossValidator -lang pt -data pt.postagger.test -encoding utf-8
                 

This will display the resulting accuracy score, e.g.:

                    
Accuracy: 0.9659110277825124
                 

Chapter 8. Lemmatizer

The lemmatizer returns, for a given word form (token) and Part of Speech tag, the dictionary form of a word, which is usually referred to as its lemma. A token could ambiguously be derived from several basic forms or dictionary words which is why the postag of the word is required to find the lemma. For example, the form `show' may refer to either the verb "to show" or to the noun "show". Currently OpenNLP implement statistical and dictionary-based lemmatizers.

Lemmatizer Tool

The easiest way to try out the Lemmatizer is the command line tool, which provides access to the statistical lemmatizer. Note that the tool is only intended for demonstration and testing.

Once you have trained a lemmatizer model (see below for instructions), you can start the Lemmatizer Tool with this command:

		   
$ opennlp LemmatizerME en-lemmatizer.bin < sentences
		  

The Lemmatizer now reads a pos tagged sentence(s) per line from standard input. For example, you can copy this sentence to the console:

		    
Rockwell_NNP International_NNP Corp._NNP 's_POS Tulsa_NNP unit_NN said_VBD it_PRP 
signed_VBD a_DT tentative_JJ agreement_NN extending_VBG its_PRP$ contract_NN with_IN
Boeing_NNP Co._NNP to_TO provide_VB structural_JJ parts_NNS for_IN Boeing_NNP 's_POS 
747_CD jetliners_NNS ._.
		  

The Lemmatizer will now echo the lemmas for each word postag pair to the console:

		    
Rockwell NNP rockwell
International NNP international
Corp. NNP corp.
's POS 's
Tulsa NNP tulsa
unit NN unit
said VBD say
it PRP it
signed VBD sign
...

		  

Lemmatizer API

The Lemmatizer can be embedded into an application via its API. Currently a statistical and DictionaryLemmatizer are available. Note that these two methods are complementary and the DictionaryLemmatizer can also be used as a way of post-processing the output of the statistical lemmatizer.

The statistical lemmatizer requires that a trained model is loaded into memory from disk or from another source. In the example below it is loaded from disk:

		
LemmatizerModel model = null;
try (InputStream modelIn = new FileInputStream("en-lemmatizer.bin"))) {
  model = new LemmatizerModel(modelIn);
}

			

After the model is loaded a LemmatizerME can be instantiated.

				
LemmatizerME lemmatizer = new LemmatizerME(model);
			

The Lemmatizer instance is now ready to lemmatize data. It expects a tokenized sentence as input, which is represented as a String array, each String object in the array is one token, and the POS tags associated with each token.

The following code shows how to determine the most likely lemma for a sentence.

		  
String[] tokens = new String[] { "Rockwell", "International", "Corp.", "'s",
    "Tulsa", "unit", "said", "it", "signed", "a", "tentative", "agreement",
    "extending", "its", "contract", "with", "Boeing", "Co.", "to",
    "provide", "structural", "parts", "for", "Boeing", "'s", "747",
    "jetliners", "." };

String[] postags = new String[] { "NNP", "NNP", "NNP", "POS", "NNP", "NN",
    "VBD", "PRP", "VBD", "DT", "JJ", "NN", "VBG", "PRP$", "NN", "IN",
    "NNP", "NNP", "TO", "VB", "JJ", "NNS", "IN", "NNP", "POS", "CD", "NNS",
    "." };

String[] lemmas = lemmatizer.lemmatize(tokens, postags);
		

The lemmas array contains one lemma for each token in the input array. The corresponding tag and lemma can be found at the same index as the token has in the input array.

The DictionaryLemmatizer is constructed by passing the InputStream of a lemmatizer dictionary. Such dictionary consists of a text file containing, for each row, a word, its postag and the corresponding lemma, each column separated by a tab character.

		
show		NN	show
showcase	NN	showcase
showcases	NNS	showcase
showdown	NN	showdown
showdowns	NNS	showdown
shower		NN	shower
showers		NNS	shower
showman		NN	showman
showmanship	NN	showmanship
showmen		NNS	showman
showroom	NN	showroom
showrooms	NNS	showroom
shows		NNS	show
shrapnel	NN	shrapnel
		
		

Alternatively, if a (word,postag) pair can output multiple lemmas, the the lemmatizer dictionary would consists of a text file containing, for each row, a word, its postag and the corresponding lemmas separated by "#":

		
muestras	NN	muestra
cantaba		V	cantar
fue		V	ir#ser
entramos	V	entrar
		
					

First the dictionary must be loaded into memory from disk or another source. In the sample below it is loaded from disk.

				
InputStream dictLemmatizer = null;

try (dictLemmatizer = new FileInputStream("english-lemmatizer.txt")) {

}

			

After the dictionary is loaded the DictionaryLemmatizer can be instantiated.

			  
DictionaryLemmatizer lemmatizer = new DictionaryLemmatizer(dictLemmatizer);
			

The DictionaryLemmatizer instance is now ready. It expects two String arrays as input, a containing the tokens and another one their respective postags.

The following code shows how to find a lemma using a DictionaryLemmatizer.

		  
String[] tokens = new String[]{"Most", "large", "cities", "in", "the", "US", "had",
                             "morning", "and", "afternoon", "newspapers", "."};
String[] tags = tagger.tag(sent);
String[] lemmas = lemmatizer.lemmatize(tokens, postags);

			

The tags array contains one part-of-speech tag for each token in the input array. The corresponding tag and lemmas can be found at the same index as the token has in the input array.

Lemmatizer Training

The training data consist of three columns separated by spaces. Each word has been put on a separate line and there is an empty line after each sentence. The first column contains the current word, the second its part-of-speech tag and the third its lemma. Here is an example of the file format:

Sample sentence of the training data:

		
He        PRP  he
reckons   VBZ  reckon
the       DT   the
current   JJ   current
accounts  NNS  account
deficit   NN   deficit
will      MD   will
narrow    VB   narrow
to        TO   to
only      RB   only
#         #    #
1.8       CD   1.8
millions  CD   million
in        IN   in
September NNP  september
.         .    O
		

The Universal Dependencies Treebank and the CoNLL 2009 datasets distribute training data for many languages.

Training Tool

OpenNLP has a command line tool which is used to train the models on various corpora.

Usage of the tool:

		
$ opennlp LemmatizerTrainerME
Usage: opennlp LemmatizerTrainerME [-factory factoryName] [-params paramsFile] -lang language -model modelFile -data sampleData [-encoding charsetName]

Arguments description:
	-factory factoryName
		A sub-class of LemmatizerFactory where to get implementation and resources.
	-params paramsFile
		training parameters file.
	-lang language
		language which is being processed.
	-model modelFile
		output model file.
	-data sampleData
		data to be used, usually a file name.
	-encoding charsetName
	encoding for reading and writing text, if absent the system default is used.
		
		

Its now assumed that the english lemmatizer model should be trained from a file called en-lemmatizer.train which is encoded as UTF-8. The following command will train the lemmatizer and write the model to en-lemmatizer.bin:

		
$ opennlp LemmatizerTrainerME -model en-lemmatizer.bin -params PerceptronTrainerParams.txt -lang en -data en-lemmatizer.train -encoding UTF-8
		

Training API

The Lemmatizer offers an API to train a new lemmatizer model. First a training parameters file needs to be instantiated:

                    
 TrainingParameters mlParams = CmdLineUtil.loadTrainingParameters(params.getParams(), false);
 if (mlParams == null) {
   mlParams = ModelUtil.createDefaultTrainingParameters();
 }
                

Then we read the training data:

                    
InputStreamFactory inputStreamFactory = null;
    try {
      inputStreamFactory = new MarkableFileInputStreamFactory(
          new File(en-lemmatizer.train));
    } catch (FileNotFoundException e) {
      e.printStackTrace();
    }
    ObjectStream<String> lineStream = null;
    LemmaSampleStream lemmaStream = null;
    try {
      lineStream = new PlainTextByLineStream(
      (inputStreamFactory), StandardCharsets.UTF_8);
      lemmaStream = new LemmaSampleStream(lineStream);
    } catch (IOException e) {
      CmdLineUtil.handleCreateObjectStreamError(e);
    }

                

The following step proceeds to train the model:

    LemmatizerModel model;
    try {
      LemmatizerFactory lemmatizerFactory = LemmatizerFactory
          .create(params.getFactory());
      model = LemmatizerME.train(params.getLang(), lemmaStream, mlParams,
          lemmatizerFactory);
    } catch (IOException e) {
      throw new TerminateToolException(-1,
          "IO error while reading training data or indexing data: "
              + e.getMessage(),
          e);
    } finally {
      try {
        sampleStream.close();
      } catch (IOException e) {
      }
    }
		

Lemmatizer Evaluation

The built in evaluation can measure the accuracy of the statistical lemmatizer. The accuracy can be measured on a test data set.

There is a command line tool to evaluate a given model on a test data set. The following command shows how the tool can be run:

				
$ opennlp LemmatizerEvaluator -model en-lemmatizer.bin -data en-lemmatizer.test -encoding utf-8
			 

This will display the resulting accuracy score, e.g.:

				
Loading model ... done
Evaluating ... done

Accuracy: 0.9659110277825124
			 

Chapter 9. Chunker

Chunking

Text chunking consists of dividing a text in syntactically correlated parts of words, like noun groups, verb groups, but does not specify their internal structure, nor their role in the main sentence.

Chunker Tool

The easiest way to try out the Chunker is the command line tool. The tool is only intended for demonstration and testing.

Download the english maxent chunker model from the website and start the Chunker Tool with this command:

				
$ opennlp ChunkerME en-chunker.bin
		

The Chunker now reads a pos tagged sentence per line from stdin. Copy these two sentences to the console:

				
Rockwell_NNP International_NNP Corp._NNP 's_POS Tulsa_NNP unit_NN said_VBD it_PRP signed_VBD 
    a_DT tentative_JJ agreement_NN extending_VBG its_PRP$ contract_NN with_IN Boeing_NNP Co._NNP
    to_TO provide_VB structural_JJ parts_NNS for_IN Boeing_NNP 's_POS 747_CD jetliners_NNS ._.
Rockwell_NNP said_VBD the_DT agreement_NN calls_VBZ for_IN it_PRP to_TO supply_VB 200_CD
    additional_JJ so-called_JJ shipsets_NNS for_IN the_DT planes_NNS ._.
		

The Chunker will now echo the sentences grouped tokens to the console:

				
[NP Rockwell_NNP International_NNP Corp._NNP ] [NP 's_POS Tulsa_NNP unit_NN ] [VP said_VBD ]
    [NP it_PRP ] [VP signed_VBD ] [NP a_DT tentative_JJ agreement_NN ] [VP extending_VBG ]
    [NP its_PRP$ contract_NN ] [PP with_IN ] [NP Boeing_NNP Co._NNP ] [VP to_TO provide_VB ]
    [NP structural_JJ parts_NNS ] [PP for_IN ] [NP Boeing_NNP ] [NP 's_POS 747_CD jetliners_NNS ] ._.
[NP Rockwell_NNP ] [VP said_VBD ] [NP the_DT agreement_NN ] [VP calls_VBZ ] [SBAR for_IN ]
    [NP it_PRP ] [VP to_TO supply_VB ] [NP 200_CD additional_JJ so-called_JJ shipsets_NNS ]
    [PP for_IN ] [NP the_DT planes_NNS ] ._.
		

The tag set used by the english pos model is the Penn Treebank tag set.

Chunking API

The Chunker can be embedded into an application via its API. First the chunker model must be loaded into memory from disk or an other source. In the sample below its loaded from disk.

				
InputStream modelIn = null;
ChunkerModel model = null;

try (modelIn = new FileInputStream("en-chunker.bin")){
  model = new ChunkerModel(modelIn);
}
			

After the model is loaded a Chunker can be instantiated.

				
ChunkerME chunker = new ChunkerME(model);
			

The Chunker instance is now ready to tag data. It expects a tokenized sentence as input, which is represented as a String array, each String object in the array is one token, and the POS tags associated with each token.

The following code shows how to determine the most likely chunk tag sequence for a sentence.

		  
String sent[] = new String[] { "Rockwell", "International", "Corp.", "'s",
    "Tulsa", "unit", "said", "it", "signed", "a", "tentative", "agreement",
    "extending", "its", "contract", "with", "Boeing", "Co.", "to",
    "provide", "structural", "parts", "for", "Boeing", "'s", "747",
    "jetliners", "." };

String pos[] = new String[] { "NNP", "NNP", "NNP", "POS", "NNP", "NN",
    "VBD", "PRP", "VBD", "DT", "JJ", "NN", "VBG", "PRP$", "NN", "IN",
    "NNP", "NNP", "TO", "VB", "JJ", "NNS", "IN", "NNP", "POS", "CD", "NNS",
    "." };

String tag[] = chunker.chunk(sent, pos);
			

The tags array contains one chunk tag for each token in the input array. The corresponding tag can be found at the same index as the token has in the input array. The confidence scores for the returned tags can be easily retrieved from a ChunkerME with the following method call:

		  
double probs[] = chunker.probs();
			

The call to probs is stateful and will always return the probabilities of the last tagged sentence. The probs method should only be called when the tag method was called before, otherwise the behavior is undefined.

Some applications need to retrieve the n-best chunk tag sequences and not only the best sequence. The topKSequences method is capable of returning the top sequences. It can be called in a similar way as chunk.

		  
Sequence topSequences[] = chunk.topKSequences(sent, pos);
			

Each Sequence object contains one sequence. The sequence can be retrieved via Sequence.getOutcomes() which returns a tags array and Sequence.getProbs() returns the probability array for this sequence.

Chunker Training

The pre-trained models might not be available for a desired language, can not detect important entities or the performance is not good enough outside the news domain.

These are the typical reason to do custom training of the chunker on a ne corpus or on a corpus which is extended by private training data taken from the data which should be analyzed.

The training data can be converted to the OpenNLP chunker training format, that is based on CoNLL2000. Other formats may also be available. The train data consist of three columns separated one single space. Each word has been put on a separate line and there is an empty line after each sentence. The first column contains the current word, the second its part-of-speech tag and the third its chunk tag. The chunk tags contain the name of the chunk type, for example I-NP for noun phrase words and I-VP for verb phrase words. Most chunk types have two types of chunk tags, B-CHUNK for the first word of the chunk and I-CHUNK for each other word in the chunk. Here is an example of the file format:

Sample sentence of the training data:

				
He        PRP  B-NP
reckons   VBZ  B-VP
the       DT   B-NP
current   JJ   I-NP
account   NN   I-NP
deficit   NN   I-NP
will      MD   B-VP
narrow    VB   I-VP
to        TO   B-PP
only      RB   B-NP
#         #    I-NP
1.8       CD   I-NP
billion   CD   I-NP
in        IN   B-PP
September NNP  B-NP
.         .    O
		

Note that for improved visualization the example above uses tabs instead of a single space as column separator.

Training Tool

OpenNLP has a command line tool which is used to train the models available from the model download page on various corpora.

Usage of the tool:

				
$ opennlp ChunkerTrainerME
Usage: opennlp ChunkerTrainerME[.ad] [-params paramsFile] [-iterations num] [-cutoff num] \
               -model modelFile -lang language -data sampleData [-encoding charsetName]

Arguments description:
        -params paramsFile
                training parameters file.
        -iterations num
                number of training iterations, ignored if -params is used.
        -cutoff num
                minimal number of times a feature must be seen, ignored if -params is used.
        -model modelFile
                output model file.
        -lang language
                language which is being processed.
        -data sampleData
                data to be used, usually a file name.
        -encoding charsetName
                encoding for reading and writing text, if absent the system default is used.
		

Its now assumed that the english chunker model should be trained from a file called en-chunker.train which is encoded as UTF-8. The following command will train the name finder and write the model to en-chunker.bin:

		
$ opennlp ChunkerTrainerME -model en-chunker.bin -lang en -data en-chunker.train -encoding UTF-8
		

Additionally its possible to specify the number of iterations, the cutoff and to overwrite all types in the training data with a single type.

Training API

The Chunker offers an API to train a new chunker model. The following sample code illustrates how to do it:

                    
ObjectStream<String> lineStream =
    new PlainTextByLineStream(new FileInputStream("en-chunker.train"), StandardCharsets.UTF_8);

ChunkerModel model;

try(ObjectStream<ChunkSample> sampleStream = new ChunkSampleStream(lineStream)) {
  model = ChunkerME.train("en", sampleStream,
      new DefaultChunkerContextGenerator(), TrainingParameters.defaultParams());
}

try (OutputStream modelOut = new BufferedOutputStream(new FileOutputStream(modelFile))) {
  model.serialize(modelOut);
}
                

Chunker Evaluation

The built in evaluation can measure the chunker performance. The performance is either measured on a test dataset or via cross validation.

Chunker Evaluation Tool

The following command shows how the tool can be run:

				
$ opennlp ChunkerEvaluator
Usage: opennlp ChunkerEvaluator[.ad] -model model [-misclassified true|false] \
               [-detailedF true|false] -lang language -data sampleData [-encoding charsetName]
		

A sample of the command considering you have a data sample named en-chunker.eval and you trained a model called en-chunker.bin:

				
$ opennlp ChunkerEvaluator -model en-chunker.bin -data en-chunker.eval -encoding UTF-8
		

and here is a sample output:

		
Precision: 0.9255923572240226
Recall: 0.9220610430991112
F-Measure: 0.9238233255623465
		

You can also use the tool to perform 10-fold cross validation of the Chunker. he following command shows how the tool can be run:

				
$ opennlp ChunkerCrossValidator
Usage: opennlp ChunkerCrossValidator[.ad] [-params paramsFile] [-iterations num] [-cutoff num] \
               [-misclassified true|false] [-folds num] [-detailedF true|false] \
               -lang language -data sampleData [-encoding charsetName]

Arguments description:
        -params paramsFile
                training parameters file.
        -iterations num
                number of training iterations, ignored if -params is used.
        -cutoff num
                minimal number of times a feature must be seen, ignored if -params is used.
        -misclassified true|false
                if true will print false negatives and false positives.
        -folds num
                number of folds, default is 10.
        -detailedF true|false
                if true will print detailed FMeasure results.
        -lang language
                language which is being processed.
        -data sampleData
                data to be used, usually a file name.
        -encoding charsetName
                encoding for reading and writing text, if absent the system default is used.
		

It is not necessary to pass a model. The tool will automatically split the data to train and evaluate:

            
$ opennlp ChunkerCrossValidator -lang pt -data en-chunker.cross -encoding UTF-8
		

Chapter 10. Parser

Parsing

Parser Tool

The easiest way to try out the Parser is the command line tool. The tool is only intended for demonstration and testing. Download the English chunking parser model from the our website and start the Parse Tool with the following command.

				
$ opennlp Parser en-parser.bin en-parser-chunking.bin
		

Loading the big parser model can take several seconds, be patient. Copy this sample sentence to the console.

				
The quick brown fox jumps over the lazy dog .
		

The parser should now print the following to the console.

				
(TOP (NP (NP (DT The) (JJ quick) (JJ brown) (NN fox) (NNS jumps)) (PP (IN over) (NP (DT the)
    (JJ lazy) (NN dog))) (. .)))
		

With the following command the input can be read from a file and be written to an output file.

				
$ opennlp Parser en-parser.bin en-parser-chunking.bin < article-tokenized.txt > article-parsed.txt.
		

The article-tokenized.txt file must contain one sentence per line which is tokenized with the English tokenizer model from our website. See the Tokenizer documentation for further details.

Parsing API

The Parser can be easily integrated into an application via its API. To instantiate a Parser the parser model must be loaded first.

				
InputStream modelIn = new FileInputStream("en-parser-chunking.bin");
try {
  ParserModel model = new ParserModel(modelIn);
}
catch (IOException e) {
  e.printStackTrace();
}
finally {
  if (modelIn != null) {
    try {
      modelIn.close();
    }
    catch (IOException e) {
    }
  }
}
		

Unlike the other components to instantiate the Parser a factory method should be used instead of creating the Parser via the new operator. The parser model is either trained for the chunking parser or the tree insert parser the parser implementation must be chosen correctly. The factory method will read a type parameter from the model and create an instance of the corresponding parser implementation.

				
Parser parser = ParserFactory.create(model);
		

Right now the tree insert parser is still experimental and there is no pre-trained model for it. The parser expect a whitespace tokenized sentence. A utility method from the command line tool can parse the sentence String. The following code shows how the parser can be called.

				
String sentence = "The quick brown fox jumps over the lazy dog .";
Parse topParses[] = ParserTool.parseLine(sentence, parser, 1);
		

The topParses array only contains one parse because the number of parses is set to 1. The Parse object contains the parse tree. To display the parse tree call the show method. It either prints the parse to the console or into a provided StringBuffer. Similar to Exception.printStackTrace.

TODO: Extend this section with more information about the Parse object.

Parser Training

The OpenNLP offers two different parser implementations, the chunking parser and the treeinsert parser. The later one is still experimental and not recommended for production use. (TODO: Add a section which explains the two different approaches) The training can either be done with the command line tool or the training API. In the first case the training data must be available in the OpenNLP format. Which is the Penn Treebank format, but with the limitation of a sentence per line.

				
(TOP (S (NP-SBJ (DT Some) )(VP (VBP say) (NP (NNP November) ))(. .) ))
(TOP (S (NP-SBJ (PRP I) )(VP (VBP say) (NP (CD 1992) ))(. .) ('' '') ))
		

Penn Treebank annotation guidelines can be found on the Penn Treebank home page. A parser model also contains a pos tagger model, depending on the amount of available training data it is recommend to switch the tagger model against a tagger model which was trained on a larger corpus. The pre-trained parser model provided on the website is doing this to achieve a better performance. (TODO: On which data is the model on the website trained, and say on which data the tagger model is trained)

Training Tool

OpenNLP has a command line tool which is used to train the models available from the model download page on various corpora. The data must be converted to the OpenNLP parser training format, which is shortly explained above. To train the parser a head rules file is also needed. (TODO: Add documentation about the head rules file) Usage of the tool:

				
$ opennlp ParserTrainer
Usage: opennlp ParserTrainer -headRules headRulesFile [-parserType CHUNKING|TREEINSERT] \
                             [-params paramsFile] [-iterations num] [-cutoff num] \
                             -model modelFile -lang language -data sampleData \
                             [-encoding charsetName]

Arguments description:
	-headRules headRulesFile
		head rules file.
	-parserType CHUNKING|TREEINSERT
		one of CHUNKING or TREEINSERT, default is CHUNKING.
	-params paramsFile
		training parameters file.
	-iterations num
		number of training iterations, ignored if -params is used.
	-cutoff num
		minimal number of times a feature must be seen, ignored if -params is used.
	-model modelFile
		output model file.
	-format formatName
		data format, might have its own parameters.
	-encoding charsetName
		encoding for reading and writing text, if absent the system default is used.
	-lang language
		language which is being processed.
	-data sampleData
		data to be used, usually a file name.
	-encoding charsetName
		encoding for reading and writing text, if absent the system default is used.
        

The model on the website was trained with the following command:

		
$ opennlp ParserTrainer -model en-parser-chunking.bin -parserType CHUNKING \
                        -head-rules head_rules \
                        -lang en -data train.all -encoding ISO-8859-1
    
		

Its also possible to specify the cutoff and the number of iterations, these parameters are used for all trained models. The -parserType parameter is an optional parameter, to use the tree insertion parser, specify TREEINSERT as type. The TaggerModelReplacer tool replaces the tagger model inside the parser model with a new one.

Note: The original parser model will be overwritten with the new parser model which contains the replaced tagger model.

		
$ opennlp TaggerModelReplacer en-parser-chunking.bin en-pos-maxent.bin
		

Additionally there are tools to just retrain the build or the check model.

Training API

The Parser training API supports the training of a new parser model. Four steps are necessary to train it:

  • A HeadRules class needs to be instantiated: currently EnglishHeadRules and AncoraSpanishHeadRules are available.

  • The application must open a sample data stream.

  • Call a Parser train method: This can be either the CHUNKING or the TREEINSERT parser.

  • Save the ParseModel to a file

The following code snippet shows how to instantiate the HeadRules:

				
static HeadRules createHeadRules(TrainerToolParams params) throws IOException {

    ArtifactSerializer headRulesSerializer = null;

    if (params.getHeadRulesSerializerImpl() != null) {
      headRulesSerializer = ExtensionLoader.instantiateExtension(ArtifactSerializer.class,
              params.getHeadRulesSerializerImpl());
    }
    else {
      if ("en".equals(params.getLang())) {
        headRulesSerializer = new opennlp.tools.parser.lang.en.HeadRules.HeadRulesSerializer();
      }
      else if ("es".equals(params.getLang())) {
        headRulesSerializer = new opennlp.tools.parser.lang.es.AncoraSpanishHeadRules.HeadRulesSerializer();
      }
      else {
        // default for now, this case should probably cause an error ...
        headRulesSerializer = new opennlp.tools.parser.lang.en.HeadRules.HeadRulesSerializer();
      }
    }

    Object headRulesObject = headRulesSerializer.create(new FileInputStream(params.getHeadRules()));

    if (headRulesObject instanceof HeadRules) {
      return (HeadRules) headRulesObject;
    }
    else {
      throw new TerminateToolException(-1, "HeadRules Artifact Serializer must create an object of type HeadRules!");
    }
}
	

The following code illustrates the three other steps, namely, opening the data, training the model and saving the ParserModel into an output file.

				
ParserModel model = null;
File modelOutFile = params.getModel();
CmdLineUtil.checkOutputFile("parser model", modelOutFile);

try {
  HeadRules rules = createHeadRules(params);
  InputStreamFactory inputStreamFactory = new MarkableFileInputStreamFactory(new File("parsing.train"));
  ObjectStream<String> stringStream = new PlainTextByLineStream(inputStreamFactory, StandardCharsets.UTF_8);
  ObjectStream<Parse> sampleStream = new ParseSample(stringStream);

  ParserType type = parseParserType(params.getParserType());
  if (ParserType.CHUNKING.equals(type)) {
    model = opennlp.tools.parser.chunking.Parser.train(
            params.getLang(), sampleStream, rules,
            mlParams);
  } else if (ParserType.TREEINSERT.equals(type)) {
    model = opennlp.tools.parser.treeinsert.Parser.train(params.getLang(), sampleStream, rules,
            mlParams);
    }
  }
  catch (IOException e) {
      throw new TerminateToolException(-1, "IO error while reading training data or indexing data: "
          + e.getMessage(), e);
  }
  finally {
      try {
        sampleStream.close();
      }
      catch (IOException e) {
        // sorry that this can fail
      }
  }
  CmdLineUtil.writeModel("parser", modelOutFile, model);

	

Parser Evaluation

The built in evaluation can measure the parser performance. The performance is measured on a test dataset.

Parser Evaluation Tool

The following command shows how the tool can be run:

				
$ opennlp ParserEvaluator
Usage: opennlp ParserEvaluator[.ontonotes|frenchtreebank] [-misclassified true|false] -model model \
               -data sampleData [-encoding charsetName]
		

A sample of the command considering you have a data sample named en-parser-chunking.eval and you trained a model called en-parser-chunking.bin:

				
$ opennlp ParserEvaluator -model en-parser-chunking.bin -data en-parser-chunking.eval -encoding UTF-8
		

and here is a sample output:

		
Precision: 0.9009744742967609
Recall: 0.8962012400910446
F-Measure: 0.8985815184245214
		

The Parser Evaluation tool reimplements the PARSEVAL scoring method as implemented by the EVALB script, which is the most widely used evaluation tool for constituent parsing. Note however that currently the Parser Evaluation tool does not allow to make exceptions in the constituents to be evaluated, in the way Collins or Bikel usually do. Any contributions are very welcome. If you want to contribute please contact us on the mailing list or comment on the jira issue OPENNLP-688.

Evaluation API

The evaluation can be performed on a pre-trained model and a test dataset or via cross validation. In the first case the model must be loaded and a Parse ObjectStream must be created (see code samples above), assuming these two objects exist the following code shows how to perform the evaluation:

			  
Parser parser = ParserFactory.create(model);
ParserEvaluator evaluator = new ParserEvaluator(parser);
evaluator.evaluate(sampleStream);

FMeasure result = evaluator.getFMeasure();

System.out.println(result.toString());
			

In the cross validation case all the training arguments must be provided (see the Training API section above). To perform cross validation the ObjectStream must be resettable.

				
InputStreamFactory inputStreamFactory = new MarkableFileInputStreamFactory(new File("parsing.train"));
ObjectStream<String> stringStream = new PlainTextByLineStream(inputStreamFactory, StandardCharsets.UTF_8);
ObjectStream<Parse> sampleStream = new ParseSample(stringStream);
ParserCrossValidator evaluator = new ParserCrossValidator("en", trainParameters, headRules, \
parserType, listeners.toArray(new ParserEvaluationMonitor[listeners.size()])));
evaluator.evaluate(sampleStream, 10);

FMeasure result = evaluator.getFMeasure();

System.out.println(result.toString());
			

Chapter 11. Coreference Resolution

The OpenNLP Coreference Resolution system links multiple mentions of an entity in a document together. The OpenNLP implementation is currently limited to noun phrase mentions, other mention types cannot be resolved.

TODO: Write more documentation about the coref component. Any contributions are very welcome. If you want to contribute please contact us on the mailing list or comment on the jira issue OPENNLP-48.

Chapter 12. Extending OpenNLP

In OpenNLP extension can be used to add new functionality and to heavily customize an existing component. Most components define a factory class which can be implemented to customize the creation of it. And some components allow to add new feature generators.

Writing an extension

In many places it is possible to pass in an extension class name to customize some aspect of OpenNLP. The implementation class needs to implement the specified interface and should have a public no-argument constructor.

Running in an OSGi container

The traditional way of loading an extension via Class.forName does not work in an OSGi environment because the class paths of the OpenNLP Tools and extension bundle are isolated. OSGi uses services to provide functionality from one bundle to another. The extension bundle must register its extensions as services so that the OpenNLP tools bundle can use them. The following code illustrates how that can be done:

				
Dictionary<String, String> props = new Hashtable<String, String>();
props.put(ExtensionServiceKeys.ID, "org.test.SuperTokenizer");
context.registerService(Tokenizer.class.getName(), new org.test.SuperTokenizer(), props);
		

The service OpenNLP is looking for might not be (yet) available. In this case OpenNLP waits until a timeout is reached. If loading the extension fails an ExtensionNotLoadedException is thrown. This exception is also thrown when the thread is interrupted while it is waiting for the extension, the interrupted flag will be set again and the calling code has a chance to handle it.

Chapter 13. Corpora

OpenNLP has built-in support to convert into the native training format or directly use various corpora needed by the different trainable components.

CONLL

CoNLL stands for the Conference on Computational Natural Language Learning and is not a single project but a consortium of developers attempting to broaden the computing environment. More information about the entire conference series can be obtained here for CoNLL.

CONLL 2000

The shared task of CoNLL-2000 is Chunking.

Getting the data

CoNLL-2000 made available training and test data for the Chunk task in English. The data consists of the same partitions of the Wall Street Journal corpus (WSJ) as the widely used data for noun phrase chunking: sections 15-18 as training data (211727 tokens) and section 20 as test data (47377 tokens). The annotation of the data has been derived from the WSJ corpus by a program written by Sabine Buchholz from Tilburg University, The Netherlands. Both training and test data can be obtained from https://www.clips.uantwerpen.be/conll2000/chunking/.

Converting the data

The data don't need to be transformed because Apache OpenNLP Chunker follows the CONLL 2000 format for training. Check Chunker Training section to learn more.

Training

We can train the model for the Chunker using the train.txt available at CONLL 2000:

			
$ opennlp ChunkerTrainerME -model en-chunker.bin -iterations 500 \
                           -lang en -data train.txt -encoding UTF-8
		

			
Indexing events using cutoff of 5

	Computing event counts...  done. 211727 events
	Indexing...  done.
Sorting and merging events... done. Reduced 211727 events to 197252.
Done indexing.
Incorporating indexed data for training...  
done.
	Number of Event Tokens: 197252
	    Number of Outcomes: 22
	  Number of Predicates: 107838
...done.
Computing model parameters...
Performing 500 iterations.
  1:  .. loglikelihood=-654457.1455212828	0.2601510435608118
  2:  .. loglikelihood=-239513.5583724216	0.9260037690044255
  3:  .. loglikelihood=-141313.1386347238	0.9443387003074715
  4:  .. loglikelihood=-101083.50853437989	0.954375209585929
... cut lots of iterations ...
498:  .. loglikelihood=-1710.8874647317095	0.9995040783650645
499:  .. loglikelihood=-1708.0908900815848	0.9995040783650645
500:  .. loglikelihood=-1705.3045902366732	0.9995040783650645
Writing chunker model ... done (4.019s)

Wrote chunker model to path: .\en-chunker.bin
		

Evaluating

We evaluate the model using the file test.txt available at CONLL 2000:

			
$ opennlp ChunkerEvaluator -model en-chunker.bin -lang en -encoding utf8 -data test.txt
		

			
Loading Chunker model ... done (0,665s)
current: 85,8 sent/s avg: 85,8 sent/s total: 86 sent
current: 88,1 sent/s avg: 87,0 sent/s total: 174 sent
current: 156,2 sent/s avg: 110,0 sent/s total: 330 sent
current: 192,2 sent/s avg: 130,5 sent/s total: 522 sent
current: 167,2 sent/s avg: 137,8 sent/s total: 689 sent
current: 179,2 sent/s avg: 144,6 sent/s total: 868 sent
current: 183,2 sent/s avg: 150,3 sent/s total: 1052 sent
current: 183,2 sent/s avg: 154,4 sent/s total: 1235 sent
current: 169,2 sent/s avg: 156,0 sent/s total: 1404 sent
current: 178,2 sent/s avg: 158,2 sent/s total: 1582 sent
current: 172,2 sent/s avg: 159,4 sent/s total: 1754 sent
current: 177,2 sent/s avg: 160,9 sent/s total: 1931 sent


Average: 161,6 sent/s 
Total: 2013 sent
Runtime: 12.457s

Precision: 0.9244354736974896
Recall: 0.9216837162502096
F-Measure: 0.9230575441395671
		

CONLL 2002

The shared task of CoNLL-2002 is language independent named entity recognition for Spanish and Dutch.

Getting the data

The data consists of three files per language: one training file and two test files testa and testb. The first test file will be used in the development phase for finding good parameters for the learning system. The second test file will be used for the final evaluation. Currently there are data files available for two languages: Spanish and Dutch.

The Spanish data is a collection of news wire articles made available by the Spanish EFE News Agency. The articles are from May 2000. The annotation was carried out by the TALP Research Center of the Technical University of Catalonia (UPC) and the Center of Language and Computation (CLiC)of the University of Barcelona (UB), and funded by the European Commission through the NAMIC project (IST-1999-12392).

The Dutch data consist of four editions of the Belgian newspaper "De Morgen" of 2000 (June 2, July 1, August 1 and September 1). The data was annotated as a part of the Atranos project at the University of Antwerp.

You can find the Spanish files here: http://www.lsi.upc.edu/~nlp/tools/nerc/nerc.html You must download esp.train.gz, unzip it and you will see the file esp.train.

You can find the Dutch files here: http://www.cnts.ua.ac.be/conll2002/ner.tgz You must unzip it and go to /ner/data/ned.train.gz, so you unzip it too, and you will see the file ned.train.

Converting the data

I will use Spanish data as reference, but it would be the same operations to Dutch. You just must remember change “-lang es” to “-lang nl” and use the correct training files. So to convert the information to the OpenNLP format:

			
$ opennlp TokenNameFinderConverter conll02 -data esp.train -lang es -types per > es_corpus_train_persons.txt
		

Optionally, you can convert the training test samples as well.

			
$ opennlp TokenNameFinderConverter conll02 -data esp.testa -lang es -types per > corpus_testa.txt
$ opennlp TokenNameFinderConverter conll02 -data esp.testb -lang es -types per > corpus_testb.txt
		

Training with Spanish data

To train the model for the name finder:

			
\bin\opennlp TokenNameFinderTrainer -lang es -encoding u
tf8 -iterations 500 -data es_corpus_train_persons.txt -model es_ner_person.bin


Indexing events using cutoff of 5

        Computing event counts...  done. 264715 events
        Indexing...  done.
Sorting and merging events... done. Reduced 264715 events to 222660.
Done indexing.
Incorporating indexed data for training...
done.
        Number of Event Tokens: 222660
           Number of Outcomes: 3
          Number of Predicates: 71514
...done.
Computing model parameters ...
Performing 500 iterations.
  1:  ... loglikelihood=-290819.1519958615      0.9689326256540053
  2:  ... loglikelihood=-37097.17676455632      0.9689326256540053
  3:  ... loglikelihood=-22910.372489660916     0.9706476776911017
  4:  ... loglikelihood=-17091.547325669497     0.9777874317662392
  5:  ... loglikelihood=-13797.620926769372     0.9833821279489262
  6:  ... loglikelihood=-11715.806710780415     0.9867140131839903
  7:  ... loglikelihood=-10289.222078246517     0.9886859452618855
  8:  ... loglikelihood=-9249.208318314624      0.9902310031543358
  9:  ... loglikelihood=-8454.169590899777      0.9913227433277298
 10:  ... loglikelihood=-7823.742997451327      0.9921953799369133
 11:  ... loglikelihood=-7309.375882641964      0.9928224694482746
 12:  ... loglikelihood=-6880.131972149693      0.9932946754056249
 13:  ... loglikelihood=-6515.3828767792365     0.993638441342576
 14:  ... loglikelihood=-6200.82723154046       0.9939595413935742
 15:  ... loglikelihood=-5926.213730444915      0.994269308501596
 16:  ... loglikelihood=-5683.9821840753275     0.9945299661900534
 17:  ... loglikelihood=-5468.4211798176075     0.9948246227074401
 18:  ... loglikelihood=-5275.127017232056      0.9950286156810154

... cut lots of iterations ...

491:  ... loglikelihood=-1174.8485558758211     0.998983812779782
492:  ... loglikelihood=-1173.9971776942477     0.998983812779782
493:  ... loglikelihood=-1173.1482915871768     0.998983812779782
494:  ... loglikelihood=-1172.3018855781158     0.998983812779782
495:  ... loglikelihood=-1171.457947774544      0.998983812779782
496:  ... loglikelihood=-1170.6164663670502     0.998983812779782
497:  ... loglikelihood=-1169.7774296286693     0.998983812779782
498:  ... loglikelihood=-1168.94082591387       0.998983812779782
499:  ... loglikelihood=-1168.1066436580463     0.9989875904274408
500:  ... loglikelihood=-1167.2748713765225     0.9989875904274408
Writing name finder model ... done (2,168s)

Wrote name finder model to
path: .\es_ner_person.bin
		

CONLL 2003

The shared task of CoNLL-2003 is language independent named entity recognition for English and German.

Getting the data

The English data is the Reuters Corpus, which is a collection of news wire articles. The Reuters Corpus can be obtained free of charges from the NIST for research purposes: http://trec.nist.gov/data/reuters/reuters.html

The German data is a collection of articles from the German newspaper Frankfurter Rundschau. The articles are part of the ECI Multilingual Text Corpus which can be obtained for 75$ (2010) from the Linguistic Data Consortium: http://www.ldc.upenn.edu/Catalog/CatalogEntry.jsp?catalogId=LDC94T5

After one of the corpora is available the data must be transformed as explained in the README file to the CONLL format. The transformed data can be read by the OpenNLP CONLL03 converter.

Converting the data (optional)

To convert the information to the OpenNLP format:

			
$ opennlp TokenNameFinderConverter conll03 -lang en -types per -data eng.train > corpus_train.txt
		

Optionally, you can convert the training test samples as well.

			
$ opennlp TokenNameFinderConverter conll03 -lang en -types per -data eng.testa > corpus_testa.txt
$ opennlp TokenNameFinderConverter conll03 -lang en -types per -data eng.testb > corpus_testb.txt
		

Training with English data

You can train the model for the name finder this way:

                
$ opennlp TokenNameFinderTrainer.conll03 -model en_ner_person.bin -iterations 500 \
                                 -lang en -types per -data eng.train -encoding utf8
                

If you have converted the data, then you can train the model for the name finder this way:

                
$ opennlp TokenNameFinderTrainer -model en_ner_person.bin -iterations 500 \
                                 -lang en -data corpus_train.txt -encoding utf8
		        

Either way you should see the following output during the training process:

			    
Indexing events using cutoff of 5

	Computing event counts...  done. 203621 events
	Indexing...  done.
Sorting and merging events... done. Reduced 203621 events to 179409.
Done indexing.
Incorporating indexed data for training...  
done.
	Number of Event Tokens: 179409
	    Number of Outcomes: 3
	  Number of Predicates: 58814
...done.
Computing model parameters...
Performing 500 iterations.
  1:  .. loglikelihood=-223700.5328318588	0.9453494482396216
  2:  .. loglikelihood=-40525.939777363084	0.9467933071736215
  3:  .. loglikelihood=-24893.98837874921	0.9598518816821447
  4:  .. loglikelihood=-18420.3379471033	0.9712996203731442
... cut lots of iterations ...
498:  .. loglikelihood=-952.8501399442295	0.9988950059178572
499:  .. loglikelihood=-952.0600155746948	0.9988950059178572
500:  .. loglikelihood=-951.2722802086295	0.9988950059178572
Writing name finder model ... done (1.638s)

Wrote name finder model to
path: .\en_ner_person.bin
		        

Evaluating with English data

You can evaluate the model for the name finder this way:

                
$ opennlp TokenNameFinderEvaluator.conll03 -model en_ner_person.bin \
                                   -lang en -types per -data eng.testa -encoding utf8
                

If you converted the test A and B files above, you can use them to evaluate the model.

			
$ opennlp TokenNameFinderEvaluator -model en_ner_person.bin -lang en -data corpus_testa.txt \
                                   -encoding utf8
		        

Either way you should see the following output:

			
Loading Token Name Finder model ... done (0.359s)
current: 190.2 sent/s avg: 190.2 sent/s total: 199 sent
current: 648.3 sent/s avg: 415.9 sent/s total: 850 sent
current: 530.1 sent/s avg: 453.6 sent/s total: 1380 sent
current: 793.8 sent/s avg: 539.0 sent/s total: 2178 sent
current: 705.4 sent/s avg: 571.9 sent/s total: 2882 sent


Average: 569.4 sent/s
Total: 3251 sent
Runtime: 5.71s

Precision: 0.9366247297154147
Recall: 0.739956568946797
F-Measure: 0.8267557582133971
		

Arvores Deitadas

The Portuguese corpora available at Floresta Sintá(c)tica project follow the Arvores Deitadas (AD) format. Apache OpenNLP includes tools to convert from AD format to native format.

Getting the data

The Corpus can be downloaded from here: http://www.linguateca.pt/floresta/corpus.html

The Name Finder models were trained using the Amazonia corpus: amazonia.ad. The Chunker models were trained using the Bosque_CF_8.0.ad.

Converting the data (optional)

To extract NameFinder training data from Amazonia corpus:

			        
$ opennlp TokenNameFinderConverter ad -lang pt -encoding ISO-8859-1 -data amazonia.ad > corpus.txt
			        

To extract Chunker training data from Bosque_CF_8.0.ad corpus:

			    
$ opennlp ChunkerConverter ad -lang pt -data Bosque_CF_8.0.ad.txt -encoding ISO-8859-1 > bosque-chunk
    			

Training and Evaluation

To perform the evaluation the corpus was split into a training and a test part.

			        
$ sed '1,55172d' corpus.txt > corpus_train.txt
$ sed '55172,100000000d' corpus.txt > corpus_test.txt
        			

        			
$ opennlp TokenNameFinderTrainer -model pt-ner.bin -cutoff 20 -lang PT -data corpus_train.txt -encoding UTF-8
...
$ opennlp TokenNameFinderEvaluator -model pt-ner.bin -lang PT -data corpus_train.txt -encoding UTF-8

Precision: 0.8005071889818507
Recall: 0.7450581122145297
F-Measure: 0.7717879983140168
			

OntoNotes Release 4.0

"OntoNotes Release 4.0, Linguistic Data Consortium (LDC) catalog number LDC2011T03 and isbn 1-58563-574-X, was developed as part of the OntoNotes project, a collaborative effort between BBN Technologies, the University of Colorado, the University of Pennsylvania and the University of Southern Californias Information Sciences Institute. The goal of the project is to annotate a large corpus comprising various genres of text (news, conversational telephone speech, weblogs, usenet newsgroups, broadcast, talk shows) in three languages (English, Chinese, and Arabic) with structural information (syntax and predicate argument structure) and shallow semantics (word sense linked to an ontology and coreference). OntoNotes Release 4.0 is supported by the Defense Advance Research Project Agency, GALE Program Contract No. HR0011-06-C-0022.

OntoNotes Release 4.0 contains the content of earlier releases -- OntoNotes Release 1.0 LDC2007T21, OntoNotes Release 2.0 LDC2008T04 and OntoNotes Release 3.0 LDC2009T24 -- and adds newswire, broadcast news, broadcast conversation and web data in English and Chinese and newswire data in Arabic. This cumulative publication consists of 2.4 million words as follows: 300k words of Arabic newswire 250k words of Chinese newswire, 250k words of Chinese broadcast news, 150k words of Chinese broadcast conversation and 150k words of Chinese web text and 600k words of English newswire, 200k word of English broadcast news, 200k words of English broadcast conversation and 300k words of English web text.

The OntoNotes project builds on two time-tested resources, following the Penn Treebank for syntax and the Penn PropBank for predicate-argument structure. Its semantic representation will include word sense disambiguation for nouns and verbs, with each word sense connected to an ontology, and coreference. The current goals call for annotation of over a million words each of English and Chinese, and half a million words of Arabic over five years." (http://catalog.ldc.upenn.edu/LDC2011T03)

Name Finder Training

The OntoNotes corpus can be used to train the Name Finder. The corpus contains many different name types to train a model for a specific type only the built-in type filter option should be used.

The sample shows how to train a model to detect person names.

			
$ bin/opennlp TokenNameFinderTrainer.ontonotes -lang en -model en-ontonotes.bin \
			 -nameTypes person -ontoNotesDir ontonotes-release-4.0/data/files/data/english/
			 
Indexing events using cutoff of 5

	Computing event counts...  done. 1953446 events
	Indexing...  done.
Sorting and merging events... done. Reduced 1953446 events to 1822037.
Done indexing.
Incorporating indexed data for training...  
done.
	Number of Event Tokens: 1822037
	    Number of Outcomes: 3
	  Number of Predicates: 298263
...done.
Computing model parameters ...
Performing 100 iterations.
  1:  ... loglikelihood=-2146079.7808976253	0.976677625078963
  2:  ... loglikelihood=-195016.59754190338	0.976677625078963
... cut lots of iterations ...			 
 99:  ... loglikelihood=-10269.902459614596	0.9987299367374374
100:  ... loglikelihood=-10227.160010853702	0.9987314724850341
Writing name finder model ... done (2.315s)

Wrote name finder model to
path: /dev/opennlp/trunk/opennlp-tools/en-ontonotes.bin	
	

Brat Format Support

The brat annotation tool is an online environment for collaborative text annotation and supports labeling documents with named entities. The best performance of a name finder can only be achieved if it was trained on documents similar to the the documents it will process. For that reason it is often necessary to manually label a large number of documents and build a custom corpus. This is where brat comes in handy.

OpenNLP can directly be trained and evaluated on labeled data in the brat format. Instructions on how to use, download and install brat can be found on the project website: http://brat.nlplab.org Configuration of brat, including setting up the different entities and relations can be found at: http://brat.nlplab.org/configuration.html

Sentences and Tokens

The brat annotation tool only adds named entity spans to the data and doesn't provide information about tokens and sentences. To train the name finder this information is required. By default it is assumed that each line is a sentence and that tokens are whitespace separated. This can be adjusted by providing a custom sentence detector and optional also a tokenizer. The opennlp brat command supports the following arguments for providing custom sentence detector and tokenizer.

-sentenceDetectorModel - your sentence model

-tokenizerModel - your tokenizer model

-ruleBasedTokenizer - simple | whitespace

Training

To train your namefinder model using your brat annotated files you can either use the opennlp command line tool or call opennlp.tools.cmdline.CLI main class from your preferred IDE. Calling opennlp TokenNameFinder.brat without arguments gives you a list of all the arguments you can use. Obviously some combinations are not valid. E.g. you should not provide a token model and also define a rule based tokenizer.

					
$ opennlp TokenNameFinderTrainer.brat
Usage: opennlp TokenNameFinderTrainer.brat [-factory factoryName] [-resources resourcesDir] [-type modelType]
[-featuregen featuregenFile] [-nameTypes types] [-sequenceCodec codec] [-params paramsFile] -lang language
-model modelFile [-tokenizerModel modelFile] [-ruleBasedTokenizer name] -annotationConfig annConfFile
-bratDataDir bratDataDir [-recursive value] [-sentenceDetectorModel modelFile]

Arguments description:
	-factory factoryName
		A sub-class of TokenNameFinderFactory
	-resources resourcesDir
		The resources directory
	-type modelType
		The type of the token name finder model
	-featuregen featuregenFile
		The feature generator descriptor file
	-nameTypes types
		name types to use for training
	-sequenceCodec codec
		sequence codec used to code name spans
	-params paramsFile
		training parameters file.
	-lang language
		language which is being processed.
	-model modelFile
		output model file.
	-tokenizerModel modelFile
	-ruleBasedTokenizer name
	-annotationConfig annConfFile
	-bratDataDir bratDataDir
		location of brat data dir
	-recursive value
	-sentenceDetectorModel modelFile

				

The following command will train a danish organization name finder model.

					
$ opennlp TokenNameFinderTrainer.brat -resources conf/resources \
-featuregen conf/resources/fg-da-org.xml -nameTypes Organization \
-params conf/resources/TrainerParams.txt -lang da \
-model models/da-org.bin -ruleBasedTokenizer simple \
-annotationConfig data/annotation.conf -bratDataDir data/gold/da/train \
-recursive true -sentenceDetectorModel models/da-sent.bin

Indexing events using cutoff of 0

Computing event counts...
done. 620738 events
Indexing...  done.
Collecting events... Done indexing.
Incorporating indexed data for training...
done.
	Number of Event Tokens: 620738
	    Number of Outcomes: 3
	  Number of Predicates: 1403655
Computing model parameters...
Performing 100 iterations.
  1:  . (614536/620738) 0.9900086671027067
  2:  . (617590/620738) 0.9949286172265915
  3:  . (618615/620738) 0.9965798775006525
  4:  . (619263/620738) 0.9976237961909856
  5:  . (619509/620738) 0.9980200986567602
  6:  . (619830/620738) 0.9985372250450271
  7:  . (619968/620738) 0.9987595410624128
  8:  . (620110/620738) 0.9989883010223315
  9:  . (620200/620738) 0.9991332897293222
 10:  . (620266/620738) 0.9992396147811153
 20:  . (620538/620738) 0.999677802873354
 30:  . (620641/620738) 0.9998437343935767
 40:  . (620653/620738) 0.9998630662211755
Stopping: change in training set accuracy less than 1.0E-5
Stats: (620594/620738) 0.9997680180688149
...done.

Writing name finder model ... Training data summary:
#Sentences: 26133
#Tokens: 620738
#Organization entities: 13053

Compressed 1403655 parameters to 116378
4 outcome patterns
done (11.099s)

Wrote name finder model to
path: models/da-org.bin

				

Evaluation

To evaluate you name finder model opennlp provides an evaluator that works with your brat annotated data. Normally you would partition your data in a training set and a test set e.g. 70% training and 30% test. The training set is of cause only used for training the model and should never be used for evaluation. The test set is only used for evaluation. In order to avoid overfitting, it is preferable if the training set and test set is somewhat balanced so that both sets represents a broad variety of the entities it should be able to identify. Shuffling the data before splitting is most likely sufficient in many cases.

					
$ opennlp TokenNameFinderEvaluator.brat -model models/da-org.bin \
-ruleBasedTokenizer simple -annotationConfig data/annotation.conf \
-bratDataDir data/gold/da/test -recursive true \
-sentenceDetectorModel models/da-sent.bin

Loading Token Name Finder model ... done (12.395s)

Average: 610.7 sent/s
Total: 6133 sent
Runtime: 10.043s

Precision: 0.7321974661424203
Recall: 0.25176505933603727
F-Measure: 0.3746926000447127


				

Cross Validation

You can also use the cross validation to evaluate you model. This can come in handy when you do not have enough data to divide it into a proper training and test set. Running cross validation with the misclassified attribute set to true can also be helpful because it will identify missed annotations as they will pop up as false positives in the text output.

					
$ opennlp TokenNameFinderCrossValidator.brat -resources conf/resources \
-featuregen conf/resources/fg-da-org.xml -nameTypes Organization \
-params conf/resources/TrainerParams.txt -lang da -misclassified true \
-folds 10 -detailedF true -ruleBasedTokenizer simple -annotationConfig data/annotation.conf \
-bratDataDir data/gold/da -recursive true -sentenceDetectorModel models/da-sent.bin

Indexing events using cutoff of 0

Computing event counts...
done. 555858 events
    Indexing...  done.
Collecting events... Done indexing.
Incorporating indexed data for training...
done.
	Number of Event Tokens: 555858
	    Number of Outcomes: 3
	  Number of Predicates: 1302740
Computing model parameters...
Performing 100 iterations.
  1:  . (550095/555858) 0.9896322442062541
  2:  . (552971/555858) 0.9948062274897546
...
...
... (training and evaluationg x 10)
...
done

Evaluated 26133 samples with 13053 entities; found: 12174 entities; correct: 10361.
       TOTAL: precision:   85.11%;  recall:   79.38%; F1:   82.14%.
Organization: precision:   85.11%;  recall:   79.38%; F1:   82.14%. [target: 13053; tp: 10361; fp: 1813]


        
				

Chapter 14. Machine Learning

Maximum Entropy

To explain what maximum entropy is, it will be simplest to quote from Manning and Schutze* (p. 589): Maximum entropy modeling is a framework for integrating information from many heterogeneous information sources for classification. The data for a classification problem is described as a (potentially large) number of features. These features can be quite complex and allow the experimenter to make use of prior knowledge about what types of informations are expected to be important for classification. Each feature corresponds to a constraint on the model. We then compute the maximum entropy model, the model with the maximum entropy of all the models that satisfy the constraints. This term may seem perverse, since we have spent most of the book trying to minimize the (cross) entropy of models, but the idea is that we do not want to go beyond the data. If we chose a model with less entropy, we would add `information' constraints to the model that are not justified by the empirical evidence available to us. Choosing the maximum entropy model is motivated by the desire to preserve as much uncertainty as possible.

So that gives a rough idea of what the maximum entropy framework is. Don't assume anything about your probability distribution other than what you have observed.

On the engineering level, using maxent is an excellent way of creating programs which perform very difficult classification tasks very well. For example, precision and recall figures for programs using maxent models have reached (or are) the state of the art on tasks like part of speech tagging, sentence detection, prepositional phrase attachment, and named entity recognition. On the engineering level, an added benefit is that the person creating a maxent model only needs to inform the training procedure of the event space, and need not worry about independence between features.

While the authors of this implementation of maximum entropy are generally interested using maxent models in natural language processing, the framework is certainly quite general and useful for a much wider variety of fields. In fact, maximum entropy modeling was originally developed for statistical physics.

For a very in-depth discussion of how maxent can be used in natural language processing, try reading Adwait Ratnaparkhi's dissertation. Also, check out Berger, Della Pietra, and Della Pietra's paper A Maximum Entropy Approach to Natural Language Processing, which provides an excellent introduction and discussion of the framework.

*Foundations of statistical natural language processing . Christopher D. Manning, Hinrich Schutze. Cambridge, Mass. : MIT Press, c1999.

Implementation

We have tried to make the opennlp.maxent implementation easy to use. To create a model, one needs (of course) the training data, and then implementations of two interfaces in the opennlp.maxent package, EventStream and ContextGenerator. These have fairly simple specifications, and example implementations can be found in the OpenNLP Tools preprocessing components.

We have also set in place some interfaces and code to make it easier to automate the training and evaluation process (the Evalable interface and the TrainEval class). It is not necessary to use this functionality, but if you do you'll find it much easier to see how well your models are doing. The opennlp.grok.preprocess.namefind package is an example of a maximum entropy component which uses this functionality.

We have managed to use several techniques to reduce the size of the models when writing them to disk, which also means that reading in a model for use is much quicker than with less compact encodings of the model. This was especially important to us since we use many maxent models in the Grok library, and we wanted the start up time and the physical size of the library to be as minimal as possible. As of version 1.2.0, maxent has an io package which greatly simplifies the process of loading and saving models in different formats.

Chapter 15. UIMA Integration

The UIMA Integration wraps the OpenNLP components in UIMA Analysis Engines which can be used to automatically annotate text and train new OpenNLP models from annotated text.

Running the pear sample in CVD

The Cas Visual Debugger is shipped as part of the UIMA distribution and is a tool which can run the OpenNLP UIMA Annotators and display their analysis results. The source distribution comes with a script which can create a sample UIMA application. Which includes the sentence detector, tokenizer, pos tagger, chunker and name finders for English. This sample application is packaged in the pear format and must be installed with the pear installer before it can be run by CVD. Please consult the UIMA documentation for further information about the pear installer.

The OpenNLP UIMA pear file must be build manually. First download the source distribution, unzip it and go to the apache-opennlp/opennlp folder. Type "mvn install" to build everything. Now build the pear file, go to apache-opennlp/opennlp-uima and build it as shown below. Note the models will be downloaded from the old SourceForge repository and are not licensed under the AL 2.0.

			
$ ant -f createPear.xml 
Buildfile: createPear.xml

createPear:
     [echo] ##### Creating OpenNlpTextAnalyzer pear #####
     [copy] Copying 13 files to OpenNlpTextAnalyzer/desc
     [copy] Copying 1 file to OpenNlpTextAnalyzer/metadata
     [copy] Copying 1 file to OpenNlpTextAnalyzer/lib
     [copy] Copying 3 files to OpenNlpTextAnalyzer/lib
    [mkdir] Created dir: OpenNlpTextAnalyzer/models
      [get] Getting: http://opennlp.sourceforge.net/models-1.5/en-token.bin
      [get] To: OpenNlpTextAnalyzer/models/en-token.bin
      [get] Getting: http://opennlp.sourceforge.net/models-1.5/en-sent.bin
      [get] To: OpenNlpTextAnalyzer/models/en-sent.bin
      [get] Getting: http://opennlp.sourceforge.net/models-1.5/en-ner-date.bin
      [get] To: OpenNlpTextAnalyzer/models/en-ner-date.bin
      [get] Getting: http://opennlp.sourceforge.net/models-1.5/en-ner-location.bin
      [get] To: OpenNlpTextAnalyzer/models/en-ner-location.bin
      [get] Getting: http://opennlp.sourceforge.net/models-1.5/en-ner-money.bin
      [get] To: OpenNlpTextAnalyzer/models/en-ner-money.bin
      [get] Getting: http://opennlp.sourceforge.net/models-1.5/en-ner-organization.bin
      [get] To: OpenNlpTextAnalyzer/models/en-ner-organization.bin
      [get] Getting: http://opennlp.sourceforge.net/models-1.5/en-ner-percentage.bin
      [get] To: OpenNlpTextAnalyzer/models/en-ner-percentage.bin
      [get] Getting: http://opennlp.sourceforge.net/models-1.5/en-ner-person.bin
      [get] To: OpenNlpTextAnalyzer/models/en-ner-person.bin
      [get] Getting: http://opennlp.sourceforge.net/models-1.5/en-ner-time.bin
      [get] To: OpenNlpTextAnalyzer/models/en-ner-time.bin
      [get] Getting: http://opennlp.sourceforge.net/models-1.5/en-pos-maxent.bin
      [get] To: OpenNlpTextAnalyzer/models/en-pos-maxent.bin
      [get] Getting: http://opennlp.sourceforge.net/models-1.5/en-chunker.bin
      [get] To: OpenNlpTextAnalyzer/models/en-chunker.bin
      [zip] Building zip: OpenNlpTextAnalyzer.pear

BUILD SUCCESSFUL
Total time: 3 minutes 20 seconds
		 

After the pear is installed start the Cas Visual Debugger shipped with the UIMA framework. And click on Tools -> Load AE. Then select the opennlp.uima.OpenNlpTextAnalyzer_pear.xml file in the file dialog. Now enter some text and start the analysis engine with "Run -> Run OpenNLPTextAnalyzer". Afterwards the results will be displayed. You should see sentences, tokens, chunks, pos tags and maybe some names. Remember the input text must be written in English.

Further Help

For more information about how to use the integration please consult the javadoc of the individual Analysis Engines and checkout the included xml descriptors.

TODO: Extend this documentation with information about the individual components. If you want to contribute please contact us on the mailing list or comment on the jira issue OPENNLP-49.

Chapter 16. Morfologik Addon

Morfologik provides tools for finite state automata (FSA) construction and dictionary-based morphological dictionaries.

The Morfologik Addon implements OpenNLP interfaces and extensions to allow the use of FSA Morfologik dictionary tools.

Morfologik Integration

To allow for an easy integration with OpenNLP, the following implementations are provided:

  • The MorfologikPOSTaggerFactory extends POSTaggerFactory, which helps creating a POSTagger model with an embedded FSA TagDictionary.

  • The MorfologikTagDictionary implements a FSA based TagDictionary, allowing for much smaller files than the default XML based with improved memory consumption.

  • The MorfologikLemmatizer implements a FSA based Lemmatizer dictionaries.

The first two implementations can be used directly from command line, as in the example bellow. Having a FSA Morfologik dictionary (see next section how to build one), you can train a POS Tagger model with an embedded FSA dictionary.

The example trains a POSTagger with a CONLL corpus named portuguese_bosque_train.conll and a FSA dictionary named pt-morfologik.dict. It will output a model named pos-pt_fsadic.model.

		
$ bin/opennlp POSTaggerTrainer -type perceptron -lang pt -model pos-pt_fsadic.model -data portuguese_bosque_train.conll \
	 -encoding UTF-8 -factory opennlp.morfologik.tagdict.MorfologikPOSTaggerFactory -dict pt-morfologik.dict
		

Another example follows. It shows how to use the MorfologikLemmatizer. You will need a lemma dictionary and info file, in this example, we will use a very small Portuguese dictionary. Its syntax is lemma,lexeme,postag.

File lemmaDictionary.txt:

		
casa,casa,NOUN
casar,casa,V
casar,casar,V-INF
Casa,Casa,PROP
casa,casinha,NOUN
casa,casona,NOUN
menino,menina,NOUN
menino,menino,NOUN
menino,meninão,NOUN
menino,menininho,NOUN
carro,carro,NOUN
		

Mandatory metadata file, which must have the same name but .info extension lemmaDictionary.info:

		
#
# REQUIRED PROPERTIES
#

# Column (lemma, inflected, tag) separator. This must be a single byte in the target encoding.
fsa.dict.separator=,

# The charset in which the input is encoded. UTF-8 is strongly recommended.
fsa.dict.encoding=UTF-8

# The type of lemma-inflected form encoding compression that precedes automaton
# construction. Allowed values: [suffix, infix, prefix, none].
# Details are in Daciuk's paper and in the code. 
# Leave at 'prefix' if not sure.
fsa.dict.encoder=prefix
		
		

The following code creates a binary FSA Morfologik dictionary, loads it in MorfologikLemmatizer and uses it to find the lemma the word "casa" noun and verb.

		
// Part 1: compile a FSA lemma dictionary 
   
// we need the tabular dictionary. It is mandatory to have info 
//  file with same name, but .info extension
Path textLemmaDictionary = Paths.get("dictionaryWithLemma.txt");

// this will build a binary dictionary located in compiledLemmaDictionary
Path compiledLemmaDictionary = new MorfologikDictionayBuilder()
    .build(textLemmaDictionary);

// Part 2: load a MorfologikLemmatizer and use it
MorfologikLemmatizer lemmatizer = new MorfologikLemmatizer(compiledLemmaDictionary);

String[] toks = {"casa", "casa"};
String[] tags = {"NOUN", "V"};

String[] lemmas = lemmatizer.lemmatize(toks, tags);
System.out.println(Arrays.toString(lemmas)); // outputs [casa, casar]
    
			

Morfologik CLI Tools

The Morfologik addon provides a command line tool. XMLDictionaryToTable makes easy to convert from an OpenNLP XML based dictionary to a tabular format. MorfologikDictionaryBuilder can take a tabular dictionary and output a binary Morfologik FSA dictionary.

		
$ sh bin/morfologik-addon
OpenNLP Morfologik Addon. Usage: opennlp-morfologik-addon TOOL
where TOOL is one of:
  MorfologikDictionaryBuilder    builds a binary POS Dictionary using Morfologik
  XMLDictionaryToTable           reads an OpenNLP XML tag dictionary and outputs it in a tabular file
All tools print help when invoked with help parameter
Example: opennlp-morfologik-addon POSDictionaryBuilder help
		
		

Chapter 17. The Command Line Interface

This section details the available tools and parameters of the Command Line Interface. For a introduction in its usage please refer to the section called “Command line interface (CLI)”.

Doccat

Doccat

Learned document categorizer


Usage: opennlp Doccat model < documents


DoccatTrainer

Trainer for the learnable document categorizer


Usage: opennlp DoccatTrainer[.leipzig] [-factory factoryName] [-featureGenerators fg] [-tokenizer tokenizer] 
        [-params paramsFile] -lang language -model modelFile -data sampleData [-encoding charsetName] 
Arguments description:
	-factory factoryName
		A sub-class of DoccatFactory where to get implementation and resources.
	-featureGenerators fg
		Comma separated feature generator classes. Bag of words is used if not specified.
	-tokenizer tokenizer
		Tokenizer implementation. WhitespaceTokenizer is used if not specified.
	-params paramsFile
		training parameters file.
	-lang language
		language which is being processed.
	-model modelFile
		output model file.
	-data sampleData
		data to be used, usually a file name.
	-encoding charsetName
		encoding for reading and writing text, if absent the system default is used.


The supported formats and arguments are:

FormatArgumentValueOptionalDescription
leipzigsentencesDirsentencesDirNoDir with Leipig sentences to be used
encodingcharsetNameYesEncoding for reading and writing text, if absent the system default is used.

DoccatEvaluator

Measures the performance of the Doccat model with the reference data


Usage: opennlp DoccatEvaluator[.leipzig] -model model [-misclassified true|false] [-reportOutputFile 
        outputFile] -data sampleData [-encoding charsetName] 
Arguments description:
	-model model
		the model file to be evaluated.
	-misclassified true|false
		if true will print false negatives and false positives.
	-reportOutputFile outputFile
		the path of the fine-grained report file.
	-data sampleData
		data to be used, usually a file name.
	-encoding charsetName
		encoding for reading and writing text, if absent the system default is used.


The supported formats and arguments are:

FormatArgumentValueOptionalDescription
leipzigsentencesDirsentencesDirNoDir with Leipig sentences to be used
encodingcharsetNameYesEncoding for reading and writing text, if absent the system default is used.

DoccatCrossValidator

K-fold cross validator for the learnable Document Categorizer


Usage: opennlp DoccatCrossValidator[.leipzig] [-misclassified true|false] [-folds num] [-factory factoryName] 
        [-featureGenerators fg] [-tokenizer tokenizer] [-params paramsFile] -lang language [-reportOutputFile 
        outputFile] -data sampleData [-encoding charsetName] 
Arguments description:
	-misclassified true|false
		if true will print false negatives and false positives.
	-folds num
		number of folds, default is 10.
	-factory factoryName
		A sub-class of DoccatFactory where to get implementation and resources.
	-featureGenerators fg
		Comma separated feature generator classes. Bag of words is used if not specified.
	-tokenizer tokenizer
		Tokenizer implementation. WhitespaceTokenizer is used if not specified.
	-params paramsFile
		training parameters file.
	-lang language
		language which is being processed.
	-reportOutputFile outputFile
		the path of the fine-grained report file.
	-data sampleData
		data to be used, usually a file name.
	-encoding charsetName
		encoding for reading and writing text, if absent the system default is used.


The supported formats and arguments are:

FormatArgumentValueOptionalDescription
leipzigsentencesDirsentencesDirNoDir with Leipig sentences to be used
encodingcharsetNameYesEncoding for reading and writing text, if absent the system default is used.

DoccatConverter

Converts leipzig data format to native OpenNLP format


Usage: opennlp DoccatConverter help|leipzig [help|options...]


The supported formats and arguments are:

FormatArgumentValueOptionalDescription
leipzigsentencesDirsentencesDirNoDir with Leipig sentences to be used
encodingcharsetNameYesEncoding for reading and writing text, if absent the system default is used.

Langdetect

LanguageDetector

Learned language detector


Usage: opennlp LanguageDetector model < documents


LanguageDetectorTrainer

Trainer for the learnable language detector


Usage: opennlp LanguageDetectorTrainer[.leipzig] -model modelFile [-params paramsFile] [-factory factoryName] 
        -data sampleData [-encoding charsetName] 
Arguments description:
	-model modelFile
		output model file.
	-params paramsFile
		training parameters file.
	-factory factoryName
		A sub-class of LanguageDetectorFactory where to get implementation and resources.
	-data sampleData
		data to be used, usually a file name.
	-encoding charsetName
		encoding for reading and writing text, if absent the system default is used.


The supported formats and arguments are:

FormatArgumentValueOptionalDescription
leipzigsentencesDirsentencesDirNoDir with Leipig sentences to be used
sentencesPerSamplesentencesPerSampleNoNumber of sentences per sample
samplesPerLanguagesamplesPerLanguageNoNumber of samples per language
encodingcharsetNameYesEncoding for reading and writing text, if absent the system default is used.

LanguageDetectorConverter

Converts leipzig data format to native OpenNLP format


Usage: opennlp LanguageDetectorConverter help|leipzig [help|options...]


The supported formats and arguments are:

FormatArgumentValueOptionalDescription
leipzigsentencesDirsentencesDirNoDir with Leipig sentences to be used
sentencesPerSamplesentencesPerSampleNoNumber of sentences per sample
samplesPerLanguagesamplesPerLanguageNoNumber of samples per language
encodingcharsetNameYesEncoding for reading and writing text, if absent the system default is used.

LanguageDetectorCrossValidator

K-fold cross validator for the learnable Language Detector


Usage: opennlp LanguageDetectorCrossValidator[.leipzig] [-misclassified true|false] [-folds num] [-factory 
        factoryName] [-params paramsFile] [-reportOutputFile outputFile] -data sampleData [-encoding 
        charsetName] 
Arguments description:
	-misclassified true|false
		if true will print false negatives and false positives.
	-folds num
		number of folds, default is 10.
	-factory factoryName
		A sub-class of LanguageDetectorFactory where to get implementation and resources.
	-params paramsFile
		training parameters file.
	-reportOutputFile outputFile
		the path of the fine-grained report file.
	-data sampleData
		data to be used, usually a file name.
	-encoding charsetName
		encoding for reading and writing text, if absent the system default is used.


The supported formats and arguments are:

FormatArgumentValueOptionalDescription
leipzigsentencesDirsentencesDirNoDir with Leipig sentences to be used
sentencesPerSamplesentencesPerSampleNoNumber of sentences per sample
samplesPerLanguagesamplesPerLanguageNoNumber of samples per language
encodingcharsetNameYesEncoding for reading and writing text, if absent the system default is used.

LanguageDetectorEvaluator

Measures the performance of the Language Detector model with the reference data


Usage: opennlp LanguageDetectorEvaluator[.leipzig] -model model [-misclassified true|false] 
        [-reportOutputFile outputFile] -data sampleData [-encoding charsetName] 
Arguments description:
	-model model
		the model file to be evaluated.
	-misclassified true|false
		if true will print false negatives and false positives.
	-reportOutputFile outputFile
		the path of the fine-grained report file.
	-data sampleData
		data to be used, usually a file name.
	-encoding charsetName
		encoding for reading and writing text, if absent the system default is used.


The supported formats and arguments are:

FormatArgumentValueOptionalDescription
leipzigsentencesDirsentencesDirNoDir with Leipig sentences to be used
sentencesPerSamplesentencesPerSampleNoNumber of sentences per sample
samplesPerLanguagesamplesPerLanguageNoNumber of samples per language
encodingcharsetNameYesEncoding for reading and writing text, if absent the system default is used.

Dictionary

DictionaryBuilder

Builds a new dictionary


Usage: opennlp DictionaryBuilder -outputFile out -inputFile in [-encoding charsetName]

Arguments description:
	-outputFile out
		The dictionary file.
	-inputFile in
		Plain file with one entry per line
	-encoding charsetName
		encoding for reading and writing text, if absent the system default is used.


Tokenizer

SimpleTokenizer

Character class tokenizer


Usage: opennlp SimpleTokenizer < sentences


TokenizerME

Learnable tokenizer


Usage: opennlp TokenizerME model < sentences


TokenizerTrainer

Trainer for the learnable tokenizer


Usage: opennlp TokenizerTrainer[.irishsentencebank|.ad|.pos|.conllx|.namefinder|.parse|.conllu] [-factory 
        factoryName] [-abbDict path] [-alphaNumOpt isAlphaNumOpt] [-params paramsFile] -lang language -model 
        modelFile -data sampleData [-encoding charsetName] 
Arguments description:
	-factory factoryName
		A sub-class of TokenizerFactory where to get implementation and resources.
	-abbDict path
		abbreviation dictionary in XML format.
	-alphaNumOpt isAlphaNumOpt
		Optimization flag to skip alpha numeric tokens for further tokenization
	-params paramsFile
		training parameters file.
	-lang language
		language which is being processed.
	-model modelFile
		output model file.
	-data sampleData
		data to be used, usually a file name.
	-encoding charsetName
		encoding for reading and writing text, if absent the system default is used.


The supported formats and arguments are:

FormatArgumentValueOptionalDescription
irishsentencebankdatasampleDataNoData to be used, usually a file name.
encodingcharsetNameYesEncoding for reading and writing text, if absent the system default is used.
adencodingcharsetNameNoEncoding for reading and writing text, if absent the system default is used.
langlanguageNoLanguage which is being processed.
datasampleDataNoData to be used, usually a file name.
splitHyphenatedTokenssplitYesIf true all hyphenated tokens will be separated (default true)
detokenizerdictionaryNoSpecifies the file with detokenizer dictionary.
posdatasampleDataNoData to be used, usually a file name.
encodingcharsetNameYesEncoding for reading and writing text, if absent the system default is used.
detokenizerdictionaryNoSpecifies the file with detokenizer dictionary.
conllxdatasampleDataNoData to be used, usually a file name.
encodingcharsetNameYesEncoding for reading and writing text, if absent the system default is used.
detokenizerdictionaryNoSpecifies the file with detokenizer dictionary.
namefinderdatasampleDataNoData to be used, usually a file name.
encodingcharsetNameYesEncoding for reading and writing text, if absent the system default is used.
detokenizerdictionaryNoSpecifies the file with detokenizer dictionary.
parsedatasampleDataNoData to be used, usually a file name.
encodingcharsetNameYesEncoding for reading and writing text, if absent the system default is used.
detokenizerdictionaryNoSpecifies the file with detokenizer dictionary.
conlludatasampleDataNoData to be used, usually a file name.
encodingcharsetNameYesEncoding for reading and writing text, if absent the system default is used.

TokenizerMEEvaluator

Evaluator for the learnable tokenizer


Usage: opennlp TokenizerMEEvaluator[.irishsentencebank|.ad|.pos|.conllx|.namefinder|.parse|.conllu] -model 
        model [-misclassified true|false] -data sampleData [-encoding charsetName] 
Arguments description:
	-model model
		the model file to be evaluated.
	-misclassified true|false
		if true will print false negatives and false positives.
	-data sampleData
		data to be used, usually a file name.
	-encoding charsetName
		encoding for reading and writing text, if absent the system default is used.


The supported formats and arguments are:

FormatArgumentValueOptionalDescription
irishsentencebankdatasampleDataNoData to be used, usually a file name.
encodingcharsetNameYesEncoding for reading and writing text, if absent the system default is used.
adencodingcharsetNameNoEncoding for reading and writing text, if absent the system default is used.
langlanguageNoLanguage which is being processed.
datasampleDataNoData to be used, usually a file name.
splitHyphenatedTokenssplitYesIf true all hyphenated tokens will be separated (default true)
detokenizerdictionaryNoSpecifies the file with detokenizer dictionary.
posdatasampleDataNoData to be used, usually a file name.
encodingcharsetNameYesEncoding for reading and writing text, if absent the system default is used.
detokenizerdictionaryNoSpecifies the file with detokenizer dictionary.
conllxdatasampleDataNoData to be used, usually a file name.
encodingcharsetNameYesEncoding for reading and writing text, if absent the system default is used.
detokenizerdictionaryNoSpecifies the file with detokenizer dictionary.
namefinderdatasampleDataNoData to be used, usually a file name.
encodingcharsetNameYesEncoding for reading and writing text, if absent the system default is used.
detokenizerdictionaryNoSpecifies the file with detokenizer dictionary.
parsedatasampleDataNoData to be used, usually a file name.
encodingcharsetNameYesEncoding for reading and writing text, if absent the system default is used.
detokenizerdictionaryNoSpecifies the file with detokenizer dictionary.
conlludatasampleDataNoData to be used, usually a file name.
encodingcharsetNameYesEncoding for reading and writing text, if absent the system default is used.

TokenizerCrossValidator

K-fold cross validator for the learnable tokenizer


Usage: opennlp TokenizerCrossValidator[.irishsentencebank|.ad|.pos|.conllx|.namefinder|.parse|.conllu] 
        [-misclassified true|false] [-folds num] [-factory factoryName] [-abbDict path] [-alphaNumOpt 
        isAlphaNumOpt] [-params paramsFile] -lang language -data sampleData [-encoding charsetName] 
Arguments description:
	-misclassified true|false
		if true will print false negatives and false positives.
	-folds num
		number of folds, default is 10.
	-factory factoryName
		A sub-class of TokenizerFactory where to get implementation and resources.
	-abbDict path
		abbreviation dictionary in XML format.
	-alphaNumOpt isAlphaNumOpt
		Optimization flag to skip alpha numeric tokens for further tokenization
	-params paramsFile
		training parameters file.
	-lang language
		language which is being processed.
	-data sampleData
		data to be used, usually a file name.
	-encoding charsetName
		encoding for reading and writing text, if absent the system default is used.


The supported formats and arguments are:

FormatArgumentValueOptionalDescription
irishsentencebankdatasampleDataNoData to be used, usually a file name.
encodingcharsetNameYesEncoding for reading and writing text, if absent the system default is used.
adencodingcharsetNameNoEncoding for reading and writing text, if absent the system default is used.
langlanguageNoLanguage which is being processed.
datasampleDataNoData to be used, usually a file name.
splitHyphenatedTokenssplitYesIf true all hyphenated tokens will be separated (default true)
detokenizerdictionaryNoSpecifies the file with detokenizer dictionary.
posdatasampleDataNoData to be used, usually a file name.
encodingcharsetNameYesEncoding for reading and writing text, if absent the system default is used.
detokenizerdictionaryNoSpecifies the file with detokenizer dictionary.
conllxdatasampleDataNoData to be used, usually a file name.
encodingcharsetNameYesEncoding for reading and writing text, if absent the system default is used.
detokenizerdictionaryNoSpecifies the file with detokenizer dictionary.
namefinderdatasampleDataNoData to be used, usually a file name.
encodingcharsetNameYesEncoding for reading and writing text, if absent the system default is used.
detokenizerdictionaryNoSpecifies the file with detokenizer dictionary.
parsedatasampleDataNoData to be used, usually a file name.
encodingcharsetNameYesEncoding for reading and writing text, if absent the system default is used.
detokenizerdictionaryNoSpecifies the file with detokenizer dictionary.
conlludatasampleDataNoData to be used, usually a file name.
encodingcharsetNameYesEncoding for reading and writing text, if absent the system default is used.

TokenizerConverter

Converts foreign data formats (irishsentencebank,ad,pos,conllx,namefinder,parse,conllu) to native OpenNLP format


Usage: opennlp TokenizerConverter help|irishsentencebank|ad|pos|conllx|namefinder|parse|conllu 
        [help|options...] 

The supported formats and arguments are:

FormatArgumentValueOptionalDescription
irishsentencebankdatasampleDataNoData to be used, usually a file name.
encodingcharsetNameYesEncoding for reading and writing text, if absent the system default is used.
adencodingcharsetNameNoEncoding for reading and writing text, if absent the system default is used.
langlanguageNoLanguage which is being processed.
datasampleDataNoData to be used, usually a file name.
splitHyphenatedTokenssplitYesIf true all hyphenated tokens will be separated (default true)
detokenizerdictionaryNoSpecifies the file with detokenizer dictionary.
posdatasampleDataNoData to be used, usually a file name.
encodingcharsetNameYesEncoding for reading and writing text, if absent the system default is used.
detokenizerdictionaryNoSpecifies the file with detokenizer dictionary.
conllxdatasampleDataNoData to be used, usually a file name.
encodingcharsetNameYesEncoding for reading and writing text, if absent the system default is used.
detokenizerdictionaryNoSpecifies the file with detokenizer dictionary.
namefinderdatasampleDataNoData to be used, usually a file name.
encodingcharsetNameYesEncoding for reading and writing text, if absent the system default is used.
detokenizerdictionaryNoSpecifies the file with detokenizer dictionary.
parsedatasampleDataNoData to be used, usually a file name.
encodingcharsetNameYesEncoding for reading and writing text, if absent the system default is used.
detokenizerdictionaryNoSpecifies the file with detokenizer dictionary.
conlludatasampleDataNoData to be used, usually a file name.
encodingcharsetNameYesEncoding for reading and writing text, if absent the system default is used.

DictionaryDetokenizer


Usage: opennlp DictionaryDetokenizer detokenizerDictionary


Sentdetect

SentenceDetector

Learnable sentence detector


Usage: opennlp SentenceDetector model < sentences


SentenceDetectorTrainer

Trainer for the learnable sentence detector


Usage: opennlp 
        SentenceDetectorTrainer[.irishsentencebank|.ad|.pos|.conllx|.namefinder|.parse|.moses|.conllu|.letsmt] 
        [-factory factoryName] [-eosChars string] [-abbDict path] [-params paramsFile] -lang language -model 
        modelFile -data sampleData [-encoding charsetName] 
Arguments description:
	-factory factoryName
		A sub-class of SentenceDetectorFactory where to get implementation and resources.
	-eosChars string
		EOS characters.
	-abbDict path
		abbreviation dictionary in XML format.
	-params paramsFile
		training parameters file.
	-lang language
		language which is being processed.
	-model modelFile
		output model file.
	-data sampleData
		data to be used, usually a file name.
	-encoding charsetName
		encoding for reading and writing text, if absent the system default is used.


The supported formats and arguments are:

FormatArgumentValueOptionalDescription
irishsentencebankdatasampleDataNoData to be used, usually a file name.
encodingcharsetNameYesEncoding for reading and writing text, if absent the system default is used.
adencodingcharsetNameNoEncoding for reading and writing text.
langlanguageNoLanguage which is being processed.
datasampleDataNoData to be used, usually a file name.
includeTitlesincludeTitlesYesIf true will include sentences marked as headlines.
posdatasampleDataNoData to be used, usually a file name.
encodingcharsetNameYesEncoding for reading and writing text, if absent the system default is used.
detokenizerdictionaryNoSpecifies the file with detokenizer dictionary.
conllxdatasampleDataNoData to be used, usually a file name.
encodingcharsetNameYesEncoding for reading and writing text, if absent the system default is used.
detokenizerdictionaryNoSpecifies the file with detokenizer dictionary.
namefinderdatasampleDataNoData to be used, usually a file name.
encodingcharsetNameYesEncoding for reading and writing text, if absent the system default is used.
detokenizerdictionaryNoSpecifies the file with detokenizer dictionary.
parsedatasampleDataNoData to be used, usually a file name.
encodingcharsetNameYesEncoding for reading and writing text, if absent the system default is used.
detokenizerdictionaryNoSpecifies the file with detokenizer dictionary.
mosesdatasampleDataNoData to be used, usually a file name.
encodingcharsetNameYesEncoding for reading and writing text, if absent the system default is used.
conllusentencesPerSamplesentencesPerSampleNoNumber of sentences per sample
datasampleDataNoData to be used, usually a file name.
encodingcharsetNameYesEncoding for reading and writing text, if absent the system default is used.
letsmtdetokenizerdictionaryYesSpecifies the file with detokenizer dictionary.
datasampleDataNoData to be used, usually a file name.
encodingcharsetNameYesEncoding for reading and writing text, if absent the system default is used.

SentenceDetectorEvaluator

Evaluator for the learnable sentence detector


Usage: opennlp 
        SentenceDetectorEvaluator[.irishsentencebank|.ad|.pos|.conllx|.namefinder|.parse|.moses|.conllu|.letsmt] 
        -model model [-misclassified true|false] -data sampleData [-encoding charsetName] 
Arguments description:
	-model model
		the model file to be evaluated.
	-misclassified true|false
		if true will print false negatives and false positives.
	-data sampleData
		data to be used, usually a file name.
	-encoding charsetName
		encoding for reading and writing text, if absent the system default is used.


The supported formats and arguments are:

FormatArgumentValueOptionalDescription
irishsentencebankdatasampleDataNoData to be used, usually a file name.
encodingcharsetNameYesEncoding for reading and writing text, if absent the system default is used.
adencodingcharsetNameNoEncoding for reading and writing text.
langlanguageNoLanguage which is being processed.
datasampleDataNoData to be used, usually a file name.
includeTitlesincludeTitlesYesIf true will include sentences marked as headlines.
posdatasampleDataNoData to be used, usually a file name.
encodingcharsetNameYesEncoding for reading and writing text, if absent the system default is used.
detokenizerdictionaryNoSpecifies the file with detokenizer dictionary.
conllxdatasampleDataNoData to be used, usually a file name.
encodingcharsetNameYesEncoding for reading and writing text, if absent the system default is used.
detokenizerdictionaryNoSpecifies the file with detokenizer dictionary.
namefinderdatasampleDataNoData to be used, usually a file name.
encodingcharsetNameYesEncoding for reading and writing text, if absent the system default is used.
detokenizerdictionaryNoSpecifies the file with detokenizer dictionary.
parsedatasampleDataNoData to be used, usually a file name.
encodingcharsetNameYesEncoding for reading and writing text, if absent the system default is used.
detokenizerdictionaryNoSpecifies the file with detokenizer dictionary.
mosesdatasampleDataNoData to be used, usually a file name.
encodingcharsetNameYesEncoding for reading and writing text, if absent the system default is used.
conllusentencesPerSamplesentencesPerSampleNoNumber of sentences per sample
datasampleDataNoData to be used, usually a file name.
encodingcharsetNameYesEncoding for reading and writing text, if absent the system default is used.
letsmtdetokenizerdictionaryYesSpecifies the file with detokenizer dictionary.
datasampleDataNoData to be used, usually a file name.
encodingcharsetNameYesEncoding for reading and writing text, if absent the system default is used.

SentenceDetectorCrossValidator

K-fold cross validator for the learnable sentence detector


Usage: opennlp 
        SentenceDetectorCrossValidator[.irishsentencebank|.ad|.pos|.conllx|.namefinder|.parse|.moses|.conllu|.letsmt] 
        [-factory factoryName] [-eosChars string] [-abbDict path] [-params paramsFile] -lang language 
        [-misclassified true|false] [-folds num] -data sampleData [-encoding charsetName] 
Arguments description:
	-factory factoryName
		A sub-class of SentenceDetectorFactory where to get implementation and resources.
	-eosChars string
		EOS characters.
	-abbDict path
		abbreviation dictionary in XML format.
	-params paramsFile
		training parameters file.
	-lang language
		language which is being processed.
	-misclassified true|false
		if true will print false negatives and false positives.
	-folds num
		number of folds, default is 10.
	-data sampleData
		data to be used, usually a file name.
	-encoding charsetName
		encoding for reading and writing text, if absent the system default is used.


The supported formats and arguments are:

FormatArgumentValueOptionalDescription
irishsentencebankdatasampleDataNoData to be used, usually a file name.
encodingcharsetNameYesEncoding for reading and writing text, if absent the system default is used.
adencodingcharsetNameNoEncoding for reading and writing text.
langlanguageNoLanguage which is being processed.
datasampleDataNoData to be used, usually a file name.
includeTitlesincludeTitlesYesIf true will include sentences marked as headlines.
posdatasampleDataNoData to be used, usually a file name.
encodingcharsetNameYesEncoding for reading and writing text, if absent the system default is used.
detokenizerdictionaryNoSpecifies the file with detokenizer dictionary.
conllxdatasampleDataNoData to be used, usually a file name.
encodingcharsetNameYesEncoding for reading and writing text, if absent the system default is used.
detokenizerdictionaryNoSpecifies the file with detokenizer dictionary.
namefinderdatasampleDataNoData to be used, usually a file name.
encodingcharsetNameYesEncoding for reading and writing text, if absent the system default is used.
detokenizerdictionaryNoSpecifies the file with detokenizer dictionary.
parsedatasampleDataNoData to be used, usually a file name.
encodingcharsetNameYesEncoding for reading and writing text, if absent the system default is used.
detokenizerdictionaryNoSpecifies the file with detokenizer dictionary.
mosesdatasampleDataNoData to be used, usually a file name.
encodingcharsetNameYesEncoding for reading and writing text, if absent the system default is used.
conllusentencesPerSamplesentencesPerSampleNoNumber of sentences per sample
datasampleDataNoData to be used, usually a file name.
encodingcharsetNameYesEncoding for reading and writing text, if absent the system default is used.
letsmtdetokenizerdictionaryYesSpecifies the file with detokenizer dictionary.
datasampleDataNoData to be used, usually a file name.
encodingcharsetNameYesEncoding for reading and writing text, if absent the system default is used.

SentenceDetectorConverter

Converts foreign data formats (irishsentencebank,ad,pos,conllx,namefinder,parse,moses,conllu,letsmt) to native OpenNLP format


Usage: opennlp SentenceDetectorConverter 
        help|irishsentencebank|ad|pos|conllx|namefinder|parse|moses|conllu|letsmt [help|options...] 

The supported formats and arguments are:

FormatArgumentValueOptionalDescription
irishsentencebankdatasampleDataNoData to be used, usually a file name.
encodingcharsetNameYesEncoding for reading and writing text, if absent the system default is used.
adencodingcharsetNameNoEncoding for reading and writing text.
langlanguageNoLanguage which is being processed.
datasampleDataNoData to be used, usually a file name.
includeTitlesincludeTitlesYesIf true will include sentences marked as headlines.
posdatasampleDataNoData to be used, usually a file name.
encodingcharsetNameYesEncoding for reading and writing text, if absent the system default is used.
detokenizerdictionaryNoSpecifies the file with detokenizer dictionary.
conllxdatasampleDataNoData to be used, usually a file name.
encodingcharsetNameYesEncoding for reading and writing text, if absent the system default is used.
detokenizerdictionaryNoSpecifies the file with detokenizer dictionary.
namefinderdatasampleDataNoData to be used, usually a file name.
encodingcharsetNameYesEncoding for reading and writing text, if absent the system default is used.
detokenizerdictionaryNoSpecifies the file with detokenizer dictionary.
parsedatasampleDataNoData to be used, usually a file name.
encodingcharsetNameYesEncoding for reading and writing text, if absent the system default is used.
detokenizerdictionaryNoSpecifies the file with detokenizer dictionary.
mosesdatasampleDataNoData to be used, usually a file name.
encodingcharsetNameYesEncoding for reading and writing text, if absent the system default is used.
conllusentencesPerSamplesentencesPerSampleNoNumber of sentences per sample
datasampleDataNoData to be used, usually a file name.
encodingcharsetNameYesEncoding for reading and writing text, if absent the system default is used.
letsmtdetokenizerdictionaryYesSpecifies the file with detokenizer dictionary.
datasampleDataNoData to be used, usually a file name.
encodingcharsetNameYesEncoding for reading and writing text, if absent the system default is used.

Namefind

TokenNameFinder

Learnable name finder


Usage: opennlp TokenNameFinder model1 model2 ... modelN < sentences


TokenNameFinderTrainer

Trainer for the learnable name finder


Usage: opennlp TokenNameFinderTrainer[.evalita|.ad|.conll03|.bionlp2004|.conll02|.muc6|.ontonotes|.brat] 
        [-factory factoryName] [-resources resourcesDir] [-type modelType] [-featuregen featuregenFile] 
        [-nameTypes types] [-sequenceCodec codec] [-params paramsFile] -lang language -model modelFile -data 
        sampleData [-encoding charsetName] 
Arguments description:
	-factory factoryName
		A sub-class of TokenNameFinderFactory
	-resources resourcesDir
		The resources directory
	-type modelType
		The type of the token name finder model
	-featuregen featuregenFile
		The feature generator descriptor file
	-nameTypes types
		name types to use for training
	-sequenceCodec codec
		sequence codec used to code name spans
	-params paramsFile
		training parameters file.
	-lang language
		language which is being processed.
	-model modelFile
		output model file.
	-data sampleData
		data to be used, usually a file name.
	-encoding charsetName
		encoding for reading and writing text, if absent the system default is used.


The supported formats and arguments are:

FormatArgumentValueOptionalDescription
evalitalangitNo 
typesper,loc,org,gpeNo 
datasampleDataNoData to be used, usually a file name.
encodingcharsetNameYesEncoding for reading and writing text, if absent the system default is used.
adencodingcharsetNameNoEncoding for reading and writing text, if absent the system default is used.
langlanguageNoLanguage which is being processed.
datasampleDataNoData to be used, usually a file name.
splitHyphenatedTokenssplitYesIf true all hyphenated tokens will be separated (default true)
conll03langeng|deuNo 
typesper,loc,org,miscNo 
datasampleDataNoData to be used, usually a file name.
encodingcharsetNameYesEncoding for reading and writing text, if absent the system default is used.
bionlp2004typesDNA,protein,cell_type,cell_line,RNANo 
datasampleDataNoData to be used, usually a file name.
encodingcharsetNameYesEncoding for reading and writing text, if absent the system default is used.
conll02langspa|nldNo 
typesper,loc,org,miscNo 
datasampleDataNoData to be used, usually a file name.
encodingcharsetNameYesEncoding for reading and writing text, if absent the system default is used.
muc6tokenizerModelmodelFileNo 
datasampleDataNoData to be used, usually a file name.
encodingcharsetNameYesEncoding for reading and writing text, if absent the system default is used.
ontonotesontoNotesDirOntoNotes 4.0 corpus directoryNo 
brattokenizerModelmodelFileYes 
ruleBasedTokenizernameYes 
annotationConfigannConfFileNo 
bratDataDirbratDataDirNoLocation of brat data dir
recursivevalueYes 
sentenceDetectorModelmodelFileYes 

TokenNameFinderEvaluator

Measures the performance of the NameFinder model with the reference data


Usage: opennlp TokenNameFinderEvaluator[.evalita|.ad|.conll03|.bionlp2004|.conll02|.muc6|.ontonotes|.brat] 
        [-nameTypes types] -model model [-misclassified true|false] [-detailedF true|false] 
        [-reportOutputFile outputFile] -data sampleData [-encoding charsetName] 
Arguments description:
	-nameTypes types
		name types to use for evaluation
	-model model
		the model file to be evaluated.
	-misclassified true|false
		if true will print false negatives and false positives.
	-detailedF true|false
		if true (default) will print detailed FMeasure results.
	-reportOutputFile outputFile
		the path of the fine-grained report file.
	-data sampleData
		data to be used, usually a file name.
	-encoding charsetName
		encoding for reading and writing text, if absent the system default is used.


The supported formats and arguments are:

FormatArgumentValueOptionalDescription
evalitalangitNo 
typesper,loc,org,gpeNo 
datasampleDataNoData to be used, usually a file name.
encodingcharsetNameYesEncoding for reading and writing text, if absent the system default is used.
adencodingcharsetNameNoEncoding for reading and writing text, if absent the system default is used.
langlanguageNoLanguage which is being processed.
datasampleDataNoData to be used, usually a file name.
splitHyphenatedTokenssplitYesIf true all hyphenated tokens will be separated (default true)
conll03langeng|deuNo 
typesper,loc,org,miscNo 
datasampleDataNoData to be used, usually a file name.
encodingcharsetNameYesEncoding for reading and writing text, if absent the system default is used.
bionlp2004typesDNA,protein,cell_type,cell_line,RNANo 
datasampleDataNoData to be used, usually a file name.
encodingcharsetNameYesEncoding for reading and writing text, if absent the system default is used.
conll02langspa|nldNo 
typesper,loc,org,miscNo 
datasampleDataNoData to be used, usually a file name.
encodingcharsetNameYesEncoding for reading and writing text, if absent the system default is used.
muc6tokenizerModelmodelFileNo 
datasampleDataNoData to be used, usually a file name.
encodingcharsetNameYesEncoding for reading and writing text, if absent the system default is used.
ontonotesontoNotesDirOntoNotes 4.0 corpus directoryNo 
brattokenizerModelmodelFileYes 
ruleBasedTokenizernameYes 
annotationConfigannConfFileNo 
bratDataDirbratDataDirNoLocation of brat data dir
recursivevalueYes 
sentenceDetectorModelmodelFileYes 

TokenNameFinderCrossValidator

K-fold cross validator for the learnable Name Finder


Usage: opennlp 
        TokenNameFinderCrossValidator[.evalita|.ad|.conll03|.bionlp2004|.conll02|.muc6|.ontonotes|.brat] 
        [-factory factoryName] [-resources resourcesDir] [-type modelType] [-featuregen featuregenFile] 
        [-nameTypes types] [-sequenceCodec codec] [-params paramsFile] -lang language [-misclassified 
        true|false] [-folds num] [-detailedF true|false] [-reportOutputFile outputFile] -data sampleData 
        [-encoding charsetName] 
Arguments description:
	-factory factoryName
		A sub-class of TokenNameFinderFactory
	-resources resourcesDir
		The resources directory
	-type modelType
		The type of the token name finder model
	-featuregen featuregenFile
		The feature generator descriptor file
	-nameTypes types
		name types to use for training
	-sequenceCodec codec
		sequence codec used to code name spans
	-params paramsFile
		training parameters file.
	-lang language
		language which is being processed.
	-misclassified true|false
		if true will print false negatives and false positives.
	-folds num
		number of folds, default is 10.
	-detailedF true|false
		if true (default) will print detailed FMeasure results.
	-reportOutputFile outputFile
		the path of the fine-grained report file.
	-data sampleData
		data to be used, usually a file name.
	-encoding charsetName
		encoding for reading and writing text, if absent the system default is used.


The supported formats and arguments are:

FormatArgumentValueOptionalDescription
evalitalangitNo 
typesper,loc,org,gpeNo 
datasampleDataNoData to be used, usually a file name.
encodingcharsetNameYesEncoding for reading and writing text, if absent the system default is used.
adencodingcharsetNameNoEncoding for reading and writing text, if absent the system default is used.
langlanguageNoLanguage which is being processed.
datasampleDataNoData to be used, usually a file name.
splitHyphenatedTokenssplitYesIf true all hyphenated tokens will be separated (default true)
conll03langeng|deuNo 
typesper,loc,org,miscNo 
datasampleDataNoData to be used, usually a file name.
encodingcharsetNameYesEncoding for reading and writing text, if absent the system default is used.
bionlp2004typesDNA,protein,cell_type,cell_line,RNANo 
datasampleDataNoData to be used, usually a file name.
encodingcharsetNameYesEncoding for reading and writing text, if absent the system default is used.
conll02langspa|nldNo 
typesper,loc,org,miscNo 
datasampleDataNoData to be used, usually a file name.
encodingcharsetNameYesEncoding for reading and writing text, if absent the system default is used.
muc6tokenizerModelmodelFileNo 
datasampleDataNoData to be used, usually a file name.
encodingcharsetNameYesEncoding for reading and writing text, if absent the system default is used.
ontonotesontoNotesDirOntoNotes 4.0 corpus directoryNo 
brattokenizerModelmodelFileYes 
ruleBasedTokenizernameYes 
annotationConfigannConfFileNo 
bratDataDirbratDataDirNoLocation of brat data dir
recursivevalueYes 
sentenceDetectorModelmodelFileYes 

TokenNameFinderConverter

Converts foreign data formats (evalita,ad,conll03,bionlp2004,conll02,muc6,ontonotes,brat) to native OpenNLP format


Usage: opennlp TokenNameFinderConverter help|evalita|ad|conll03|bionlp2004|conll02|muc6|ontonotes|brat 
        [help|options...] 

The supported formats and arguments are:

FormatArgumentValueOptionalDescription
evalitalangitNo 
typesper,loc,org,gpeNo 
datasampleDataNoData to be used, usually a file name.
encodingcharsetNameYesEncoding for reading and writing text, if absent the system default is used.
adencodingcharsetNameNoEncoding for reading and writing text, if absent the system default is used.
langlanguageNoLanguage which is being processed.
datasampleDataNoData to be used, usually a file name.
splitHyphenatedTokenssplitYesIf true all hyphenated tokens will be separated (default true)
conll03langeng|deuNo 
typesper,loc,org,miscNo 
datasampleDataNoData to be used, usually a file name.
encodingcharsetNameYesEncoding for reading and writing text, if absent the system default is used.
bionlp2004typesDNA,protein,cell_type,cell_line,RNANo 
datasampleDataNoData to be used, usually a file name.
encodingcharsetNameYesEncoding for reading and writing text, if absent the system default is used.
conll02langspa|nldNo 
typesper,loc,org,miscNo 
datasampleDataNoData to be used, usually a file name.
encodingcharsetNameYesEncoding for reading and writing text, if absent the system default is used.
muc6tokenizerModelmodelFileNo 
datasampleDataNoData to be used, usually a file name.
encodingcharsetNameYesEncoding for reading and writing text, if absent the system default is used.
ontonotesontoNotesDirOntoNotes 4.0 corpus directoryNo 
brattokenizerModelmodelFileYes 
ruleBasedTokenizernameYes 
annotationConfigannConfFileNo 
bratDataDirbratDataDirNoLocation of brat data dir
recursivevalueYes 
sentenceDetectorModelmodelFileYes 

CensusDictionaryCreator

Converts 1990 US Census names into a dictionary


Usage: opennlp CensusDictionaryCreator [-encoding charsetName] [-lang code] -censusData censusDict -dict dict

Arguments description:
	-encoding charsetName
	-lang code
	-censusData censusDict
	-dict dict


Postag

POSTagger

Learnable part of speech tagger


Usage: opennlp POSTagger model < sentences


POSTaggerTrainer

Trains a model for the part-of-speech tagger


Usage: opennlp POSTaggerTrainer[.ad|.conllx|.parse|.ontonotes|.conllu] [-factory factoryName] [-resources 
        resourcesDir] [-tagDictCutoff tagDictCutoff] [-featuregen featuregenFile] [-dict dictionaryPath] 
        [-params paramsFile] -lang language -model modelFile -data sampleData [-encoding charsetName] 
Arguments description:
	-factory factoryName
		A sub-class of POSTaggerFactory where to get implementation and resources.
	-resources resourcesDir
		The resources directory
	-tagDictCutoff tagDictCutoff
		TagDictionary cutoff. If specified will create/expand a mutable TagDictionary
	-featuregen featuregenFile
		The feature generator descriptor file
	-dict dictionaryPath
		The XML tag dictionary file
	-params paramsFile
		training parameters file.
	-lang language
		language which is being processed.
	-model modelFile
		output model file.
	-data sampleData
		data to be used, usually a file name.
	-encoding charsetName
		encoding for reading and writing text, if absent the system default is used.


The supported formats and arguments are:

FormatArgumentValueOptionalDescription
adencodingcharsetNameNoEncoding for reading and writing text, if absent the system default is used.
langlanguageNoLanguage which is being processed.
datasampleDataNoData to be used, usually a file name.
expandMEexpandMEYesExpand multiword expressions.
includeFeaturesincludeFeaturesYesCombine POS Tags with word features, like number and gender.
conllxdatasampleDataNoData to be used, usually a file name.
encodingcharsetNameYesEncoding for reading and writing text, if absent the system default is used.
parsedatasampleDataNoData to be used, usually a file name.
encodingcharsetNameYesEncoding for reading and writing text, if absent the system default is used.
ontonotesontoNotesDirOntoNotes 4.0 corpus directoryNo 
conllutagsettagsetYesU|x u for unified tags and x for language-specific part-of-speech tags
datasampleDataNoData to be used, usually a file name.
encodingcharsetNameYesEncoding for reading and writing text, if absent the system default is used.

POSTaggerEvaluator

Measures the performance of the POS tagger model with the reference data


Usage: opennlp POSTaggerEvaluator[.ad|.conllx|.parse|.ontonotes|.conllu] -model model [-misclassified 
        true|false] [-reportOutputFile outputFile] -data sampleData [-encoding charsetName] 
Arguments description:
	-model model
		the model file to be evaluated.
	-misclassified true|false
		if true will print false negatives and false positives.
	-reportOutputFile outputFile
		the path of the fine-grained report file.
	-data sampleData
		data to be used, usually a file name.
	-encoding charsetName
		encoding for reading and writing text, if absent the system default is used.


The supported formats and arguments are:

FormatArgumentValueOptionalDescription
adencodingcharsetNameNoEncoding for reading and writing text, if absent the system default is used.
langlanguageNoLanguage which is being processed.
datasampleDataNoData to be used, usually a file name.
expandMEexpandMEYesExpand multiword expressions.
includeFeaturesincludeFeaturesYesCombine POS Tags with word features, like number and gender.
conllxdatasampleDataNoData to be used, usually a file name.
encodingcharsetNameYesEncoding for reading and writing text, if absent the system default is used.
parsedatasampleDataNoData to be used, usually a file name.
encodingcharsetNameYesEncoding for reading and writing text, if absent the system default is used.
ontonotesontoNotesDirOntoNotes 4.0 corpus directoryNo 
conllutagsettagsetYesU|x u for unified tags and x for language-specific part-of-speech tags
datasampleDataNoData to be used, usually a file name.
encodingcharsetNameYesEncoding for reading and writing text, if absent the system default is used.

POSTaggerCrossValidator

K-fold cross validator for the learnable POS tagger


Usage: opennlp POSTaggerCrossValidator[.ad|.conllx|.parse|.ontonotes|.conllu] [-misclassified true|false] 
        [-folds num] [-factory factoryName] [-resources resourcesDir] [-tagDictCutoff tagDictCutoff] 
        [-featuregen featuregenFile] [-dict dictionaryPath] [-params paramsFile] -lang language 
        [-reportOutputFile outputFile] -data sampleData [-encoding charsetName] 
Arguments description:
	-misclassified true|false
		if true will print false negatives and false positives.
	-folds num
		number of folds, default is 10.
	-factory factoryName
		A sub-class of POSTaggerFactory where to get implementation and resources.
	-resources resourcesDir
		The resources directory
	-tagDictCutoff tagDictCutoff
		TagDictionary cutoff. If specified will create/expand a mutable TagDictionary
	-featuregen featuregenFile
		The feature generator descriptor file
	-dict dictionaryPath
		The XML tag dictionary file
	-params paramsFile
		training parameters file.
	-lang language
		language which is being processed.
	-reportOutputFile outputFile
		the path of the fine-grained report file.
	-data sampleData
		data to be used, usually a file name.
	-encoding charsetName
		encoding for reading and writing text, if absent the system default is used.


The supported formats and arguments are:

FormatArgumentValueOptionalDescription
adencodingcharsetNameNoEncoding for reading and writing text, if absent the system default is used.
langlanguageNoLanguage which is being processed.
datasampleDataNoData to be used, usually a file name.
expandMEexpandMEYesExpand multiword expressions.
includeFeaturesincludeFeaturesYesCombine POS Tags with word features, like number and gender.
conllxdatasampleDataNoData to be used, usually a file name.
encodingcharsetNameYesEncoding for reading and writing text, if absent the system default is used.
parsedatasampleDataNoData to be used, usually a file name.
encodingcharsetNameYesEncoding for reading and writing text, if absent the system default is used.
ontonotesontoNotesDirOntoNotes 4.0 corpus directoryNo 
conllutagsettagsetYesU|x u for unified tags and x for language-specific part-of-speech tags
datasampleDataNoData to be used, usually a file name.
encodingcharsetNameYesEncoding for reading and writing text, if absent the system default is used.

POSTaggerConverter

Converts foreign data formats (ad,conllx,parse,ontonotes,conllu) to native OpenNLP format


Usage: opennlp POSTaggerConverter help|ad|conllx|parse|ontonotes|conllu [help|options...]


The supported formats and arguments are:

FormatArgumentValueOptionalDescription
adencodingcharsetNameNoEncoding for reading and writing text, if absent the system default is used.
langlanguageNoLanguage which is being processed.
datasampleDataNoData to be used, usually a file name.
expandMEexpandMEYesExpand multiword expressions.
includeFeaturesincludeFeaturesYesCombine POS Tags with word features, like number and gender.
conllxdatasampleDataNoData to be used, usually a file name.
encodingcharsetNameYesEncoding for reading and writing text, if absent the system default is used.
parsedatasampleDataNoData to be used, usually a file name.
encodingcharsetNameYesEncoding for reading and writing text, if absent the system default is used.
ontonotesontoNotesDirOntoNotes 4.0 corpus directoryNo 
conllutagsettagsetYesU|x u for unified tags and x for language-specific part-of-speech tags
datasampleDataNoData to be used, usually a file name.
encodingcharsetNameYesEncoding for reading and writing text, if absent the system default is used.

Lemmatizer

LemmatizerME

Learnable lemmatizer


Usage: opennlp LemmatizerME model < sentences


LemmatizerTrainerME

Trainer for the learnable lemmatizer


Usage: opennlp LemmatizerTrainerME[.conllu] [-factory factoryName] [-params paramsFile] -lang language -model 
        modelFile -data sampleData [-encoding charsetName] 
Arguments description:
	-factory factoryName
		A sub-class of LemmatizerFactory where to get implementation and resources.
	-params paramsFile
		training parameters file.
	-lang language
		language which is being processed.
	-model modelFile
		output model file.
	-data sampleData
		data to be used, usually a file name.
	-encoding charsetName
		encoding for reading and writing text, if absent the system default is used.


The supported formats and arguments are:

FormatArgumentValueOptionalDescription
conllutagsettagsetYesU|x u for unified tags and x for language-specific part-of-speech tags
datasampleDataNoData to be used, usually a file name.
encodingcharsetNameYesEncoding for reading and writing text, if absent the system default is used.

LemmatizerEvaluator

Measures the performance of the Lemmatizer model with the reference data


Usage: opennlp LemmatizerEvaluator[.conllu] -model model [-misclassified true|false] [-reportOutputFile 
        outputFile] -data sampleData [-encoding charsetName] 
Arguments description:
	-model model
		the model file to be evaluated.
	-misclassified true|false
		if true will print false negatives and false positives.
	-reportOutputFile outputFile
		the path of the fine-grained report file.
	-data sampleData
		data to be used, usually a file name.
	-encoding charsetName
		encoding for reading and writing text, if absent the system default is used.


The supported formats and arguments are:

FormatArgumentValueOptionalDescription
conllutagsettagsetYesU|x u for unified tags and x for language-specific part-of-speech tags
datasampleDataNoData to be used, usually a file name.
encodingcharsetNameYesEncoding for reading and writing text, if absent the system default is used.

Chunker

ChunkerME

Learnable chunker


Usage: opennlp ChunkerME model < sentences


ChunkerTrainerME

Trainer for the learnable chunker


Usage: opennlp ChunkerTrainerME[.ad] [-factory factoryName] [-params paramsFile] -lang language -model 
        modelFile -data sampleData [-encoding charsetName] 
Arguments description:
	-factory factoryName
		A sub-class of ChunkerFactory where to get implementation and resources.
	-params paramsFile
		training parameters file.
	-lang language
		language which is being processed.
	-model modelFile
		output model file.
	-data sampleData
		data to be used, usually a file name.
	-encoding charsetName
		encoding for reading and writing text, if absent the system default is used.


The supported formats and arguments are:

FormatArgumentValueOptionalDescription
adencodingcharsetNameNoEncoding for reading and writing text, if absent the system default is used.
langlanguageNoLanguage which is being processed.
endendYesIndex of last sentence
startstartYesIndex of first sentence
datasampleDataNoData to be used, usually a file name.

ChunkerEvaluator

Measures the performance of the Chunker model with the reference data


Usage: opennlp ChunkerEvaluator[.ad] -model model [-misclassified true|false] [-detailedF true|false] -data 
        sampleData [-encoding charsetName] 
Arguments description:
	-model model
		the model file to be evaluated.
	-misclassified true|false
		if true will print false negatives and false positives.
	-detailedF true|false
		if true (default) will print detailed FMeasure results.
	-data sampleData
		data to be used, usually a file name.
	-encoding charsetName
		encoding for reading and writing text, if absent the system default is used.


The supported formats and arguments are:

FormatArgumentValueOptionalDescription
adencodingcharsetNameNoEncoding for reading and writing text, if absent the system default is used.
langlanguageNoLanguage which is being processed.
endendYesIndex of last sentence
startstartYesIndex of first sentence
datasampleDataNoData to be used, usually a file name.

ChunkerCrossValidator

K-fold cross validator for the chunker


Usage: opennlp ChunkerCrossValidator[.ad] [-factory factoryName] [-params paramsFile] -lang language 
        [-misclassified true|false] [-folds num] [-detailedF true|false] -data sampleData [-encoding 
        charsetName] 
Arguments description:
	-factory factoryName
		A sub-class of ChunkerFactory where to get implementation and resources.
	-params paramsFile
		training parameters file.
	-lang language
		language which is being processed.
	-misclassified true|false
		if true will print false negatives and false positives.
	-folds num
		number of folds, default is 10.
	-detailedF true|false
		if true (default) will print detailed FMeasure results.
	-data sampleData
		data to be used, usually a file name.
	-encoding charsetName
		encoding for reading and writing text, if absent the system default is used.


The supported formats and arguments are:

FormatArgumentValueOptionalDescription
adencodingcharsetNameNoEncoding for reading and writing text, if absent the system default is used.
langlanguageNoLanguage which is being processed.
endendYesIndex of last sentence
startstartYesIndex of first sentence
datasampleDataNoData to be used, usually a file name.

ChunkerConverter

Converts ad data format to native OpenNLP format


Usage: opennlp ChunkerConverter help|ad [help|options...]


The supported formats and arguments are:

FormatArgumentValueOptionalDescription
adencodingcharsetNameNoEncoding for reading and writing text, if absent the system default is used.
langlanguageNoLanguage which is being processed.
endendYesIndex of last sentence
startstartYesIndex of first sentence
datasampleDataNoData to be used, usually a file name.

Parser

Parser

Performs full syntactic parsing


Usage: opennlp Parser [-bs n -ap n -k n -tk tok_model] model < sentences 
-bs n: Use a beam size of n.
-ap f: Advance outcomes in with at least f% of the probability mass.
-k n: Show the top n parses.  This will also display their log-probablities.
-tk tok_model: Use the specified tokenizer model to tokenize the sentences. Defaults to a WhitespaceTokenizer.


ParserTrainer

Trains the learnable parser


Usage: opennlp ParserTrainer[.ontonotes|.frenchtreebank] [-headRulesSerializerImpl className] -headRules 
        headRulesFile [-parserType CHUNKING|TREEINSERT] [-fun true|false] [-params paramsFile] -lang language 
        -model modelFile [-encoding charsetName] -data sampleData 
Arguments description:
	-headRulesSerializerImpl className
		head rules artifact serializer class name
	-headRules headRulesFile
		head rules file.
	-parserType CHUNKING|TREEINSERT
		one of CHUNKING or TREEINSERT, default is CHUNKING.
	-fun true|false
		Learn to generate function tags.
	-params paramsFile
		training parameters file.
	-lang language
		language which is being processed.
	-model modelFile
		output model file.
	-encoding charsetName
		encoding for reading and writing text, if absent the system default is used.
	-data sampleData
		data to be used, usually a file name.


The supported formats and arguments are:

FormatArgumentValueOptionalDescription
ontonotesontoNotesDirOntoNotes 4.0 corpus directoryNo 
frenchtreebankdatasampleDataNoData to be used, usually a file name.
encodingcharsetNameYesEncoding for reading and writing text, if absent the system default is used.

ParserEvaluator

Measures the performance of the Parser model with the reference data


Usage: opennlp ParserEvaluator[.ontonotes|.frenchtreebank] -model model [-misclassified true|false] -data 
        sampleData [-encoding charsetName] 
Arguments description:
	-model model
		the model file to be evaluated.
	-misclassified true|false
		if true will print false negatives and false positives.
	-data sampleData
		data to be used, usually a file name.
	-encoding charsetName
		encoding for reading and writing text, if absent the system default is used.


The supported formats and arguments are:

FormatArgumentValueOptionalDescription
ontonotesontoNotesDirOntoNotes 4.0 corpus directoryNo 
frenchtreebankdatasampleDataNoData to be used, usually a file name.
encodingcharsetNameYesEncoding for reading and writing text, if absent the system default is used.

ParserConverter

Converts foreign data formats (ontonotes,frenchtreebank) to native OpenNLP format


Usage: opennlp ParserConverter help|ontonotes|frenchtreebank [help|options...]


The supported formats and arguments are:

FormatArgumentValueOptionalDescription
ontonotesontoNotesDirOntoNotes 4.0 corpus directoryNo 
frenchtreebankdatasampleDataNoData to be used, usually a file name.
encodingcharsetNameYesEncoding for reading and writing text, if absent the system default is used.

BuildModelUpdater

Trains and updates the build model in a parser model


Usage: opennlp BuildModelUpdater[.ontonotes|.frenchtreebank] -model modelFile [-params paramsFile] -lang 
        language -data sampleData [-encoding charsetName] 
Arguments description:
	-model modelFile
		output model file.
	-params paramsFile
		training parameters file.
	-lang language
		language which is being processed.
	-data sampleData
		data to be used, usually a file name.
	-encoding charsetName
		encoding for reading and writing text, if absent the system default is used.


The supported formats and arguments are:

FormatArgumentValueOptionalDescription
ontonotesontoNotesDirOntoNotes 4.0 corpus directoryNo 
frenchtreebankdatasampleDataNoData to be used, usually a file name.
encodingcharsetNameYesEncoding for reading and writing text, if absent the system default is used.

CheckModelUpdater

Trains and updates the check model in a parser model


Usage: opennlp CheckModelUpdater[.ontonotes|.frenchtreebank] -model modelFile [-params paramsFile] -lang 
        language -data sampleData [-encoding charsetName] 
Arguments description:
	-model modelFile
		output model file.
	-params paramsFile
		training parameters file.
	-lang language
		language which is being processed.
	-data sampleData
		data to be used, usually a file name.
	-encoding charsetName
		encoding for reading and writing text, if absent the system default is used.


The supported formats and arguments are:

FormatArgumentValueOptionalDescription
ontonotesontoNotesDirOntoNotes 4.0 corpus directoryNo 
frenchtreebankdatasampleDataNoData to be used, usually a file name.
encodingcharsetNameYesEncoding for reading and writing text, if absent the system default is used.

TaggerModelReplacer

Replaces the tagger model in a parser model


Usage: opennlp TaggerModelReplacer parser.model tagger.model


Entitylinker

EntityLinker

Links an entity to an external data set


Usage: opennlp EntityLinker model < sentences


Languagemodel

NGramLanguageModel

Gives the probability and most probable next token(s) of a sequence of tokens in a language model


Usage: opennlp NGramLanguageModel model